1840MM X 10MM X 25 TON WELLTIME SLITTING LINE

Manufacturer: Well Time

YOM: 2005

Material width min / max: 900mm / 1840mm

Strip width min/max: Max number of cuts =22 / 1840mm

Coil weight: 25Ton

Strip thickness min/max: 2mm - 10.0mm

Coil OD: 1900mm

Line direction: Left to right

Fantek PLC (Good European supply/repair and distribution network) ABB + Danfoss + Parker drivers)

Pay-Off:

Double cone uncoiler on slides – OD = 508mm / 700mm 7 812mm (LEAFS)

Overhead snubber roll with electric motor

Winder: No drive (just for feeding strip) – just brakes

Underground coil car with coil bay

Peeler table

Driven pinch roll stand

5-Roll flattener with 93kW DC drive @460V

Crop shear

Tilting transport table

Cascading roll table

Looping pit with two transport tables

Slitting head:

Edge guiding with electrical driven adjustment before slitting head

Horizontal guide rolls before slitting head

Shaft OD: 330mm

Slitting head motor: 250kW DC drive

Double scrap winder setup – One at operator side + One at drive side – 11kW AC drive per side

Two slitting heads with quick change system, on slides – Hydraulically clamped

Horizontal guide rolls

Tiltable transport tables over pit

Tension stand:

Two separation rolls at entry

Hydraulic Material brake

Driven Pinch rolls

Crop shear

Horizontal guide rolls

Crop shear

Material table

Re-coiler:

Full hydraulic drum with outer bearing support arm

Hydraulic push-off plate

Overhead separator arm

Motor: 185kW DC drive

Underground coil car

4 – arm coil turnstile – 25ton per arm

OD: 508mm / 610mm LEAFS

25Ton coil tipping table