2 Hi 1 Stand Lewis Rolling Mill

Name: 2 Hi 1 Stand Lewis Rolling Mill
Brand: LEWIS
SKU: 2220
Availability: InStock

Brand

LEWIS

Location

Ohio

Specifications
Files & Videos

22" x 40" Non-Reversing Cold Mill

Coil Weight:               30,000 lbs. (13,500kgs)
Mill Speed:                309 to 618 FPM (90 to 190 mpm)
Post Size:                 13" x 15.50" (330 x 340 mm)
Window Dimension:          2' Wide x 6'-1.25" High (610 W x 1855 H mm)
Mill Bearings:             Timken Roller
Main Mill Drive Motor:     200 HP, 575/1150 RPM, 230 V DC

Coil Information:
Width: 36" (915 mm)
I.D.: 20" (508 mm)
O.D.: 60" (1524 mm)

Consisting of the following:

-Payoff Reel:
  Mfg: Loopco
  Year: 1973
  Model: 1600
  Mandrel: 15.50" - 20" Dia. x 44" Face (508 mm)
Tension: Wichita Water Cooled Brake
  Features: Holddown Roll, AC Thread Up Motor, Hydraulic Expansion,
              Sliding Base.

-Tension Reel:
  Mfg: Matteson
  Year: 1976
  Mandrel: 20" Dia. x 44" Face with Hydraulic Expansion and Gripping (508 dia x 1117 mm face)
Motor: 100 HP DC, 400/1200 RPM
  Gear Ratio: 9.69:1
  Features: Coil Stripping with (2) - 4" Dia. x 45.50" Cylinders
  Overhead Holddown
  Motorized Lube Pump
  Sliding Base

-(1) Coil Car:
  Mfg: Loopco
  Year: 1973
  With 40" Platform
  Hydraulic Coil Lift: 6" Dia. x 20" Cylinder
  Motorized Car Travel through Chain Drive

-(2) Coil Turnstiles:
  Mfg: Loopco
  Year: 1976
  Power Rotation
  31" Arm Extension into Coil I.D. (787 mm)

-Combination Gear and Pinion Drive:
  Mfg: D.O. JAMES, 1976
  Serial: #255454
  Input Speed: 575/1190 RPM
  Rating: 288 HP at 575 RPM
  Pinion Centers: 22" (560mm)
Motorized Lube Pump

-(2) Spindles with Universal Couplings and Carrier

-Mill Stand:
  Mfg: Original
  Year: 1950, Altered - 1976
  2 Housings jointed by 39.50" Separator (1000 mm)
Electro-Mechanical Screwdowns
   Motors: 2 - 5 HP, 900 RPM, 220/440 V, 3/60 AC
   Screw Speed: 0.083" to 0.208" Per Minute
   Screw Dia.: 7" (177 mm)
Main Drive: 200 HP DC

-Mill Base:
  Mfg.: Waterbury Farrel, 1976
  Welded Steel Construction

-Entry Deflector Roll with Peeler Table

-Exit Deflector Roll, Wiper and Carry Over to Tension Reel.

Available with Two Sets of Roll, Chocks and Roller Bearings.

Note: SCR's and Control not available.

No files or videos to display