9" x 49" KENT USA KTM-3VSF MANUAL KNEE MILL - NEW
PRODUCT FEATURES
- 3 HP spindle motor, variable speed milling head with AC-Frequency drive, digital RPM display, analog load meter, and automatic spindle direction reversal when switching between high & low speed ranges
- 9” x 49” hardened and ground table top
- T-slots ground parallel to table ways
- Table, saddle, and knee with hardened and ground dovetail ways
- Precision ground leadscrews with backlash compensating double nut
- Precision bored and ground milling head, with super precision ABEC-7 bearings
- Meehanite® casting, with built in coolant reservoir in machine base
- Automatic lubrication, with metered check-valves
OPTIONAL ACCESSORIES
- Digital Readout System
- Table (X-Axis) Power Feed
- Saddle (Y-Axis) Power Feed
- Knee (Z-Axis) Power Feed
- Air Power Drawbar
- Flood Coolant System
- Chip Pan
- Riser Block
- Angle-Lock Vise
- Rustlick Coolant
- Acu-Rite 200S DRO System (2-axis, 0.0002” resolution)
- Right angle milling attachment with arbor support
- # 30 taper spindle option
- Rotary table (12”, vertical and horizontal)
- Clamping kit (52 pc)
- R-8 collet set (11 pc/set, 1/8” to 3/4″)
- Upgrade to 440V power
- Table Size
- Table Travel (X-Axis)
- Saddle Travel (Y-Axis)
- Knee Travel (Z-Axis)
- Quill Travel
- Ram Travel
- Spindle Motor
- Spindle Speed
- Spindle Taper
- Quill Diameter
- Quill Feed Rate
- Drilling Capacity (Manual / Power)
- Boring Capacity
- Milling Capacity
- Maximum Work Load (Center)
- Spindle Nose to Table Surface
- Spindle Center to Column
- Net Weight
- Gross Weight
- Shipping Dimensions
- Power Requirements
- 9" x 49" (Opt 10" x 54")
- 35"
- 12"
- 15"
- 5.5" (4" w/MillPwr-3 CNC Control)
- 14.5"
- 3 HP
- 60–500-4200 RPM (Var) (60-6000 Opt)
- R-8 (NMTB-30 or Q.C. spindle optional) Optionsal?
- 3.375"
- 0.0015" / 0.003" / 0.006" in/rev
- 0.75" / 0.37" diameter
- 6" diameter
- 2.0 in³/min
- 750 lbs
- 2.75" - 17.75"
- 5" - 27"
- 2500 lbs
- 2600 lbs
- 72" x 72" (skid)
- 220v, 3 phase, 60 Hz, 10 Amp (optional 440v power requires 5A) but can also accept 220v, 1-phase power (15A) without a phase converter, ideal for customers with only 1-phase power
|
No files or videos to display