14" x 40" WILLIS Model LD-1440E Precision Engine Lathe, S/N 8911012.

Specifications: 
Swing - 14" 
Swing in gap - 20-1/4" 
Swing over cross slide - 8-5/8"
Bed width - 7-1/2"  
Centers - 40" 
Spindle bore - 1-1/2" 
Spindle nose - D1-4
Spindle speeds (9) - 80 to 2000 rpm
Spindle motor - 3 HP (wired 3/60/220v) 
Longitudinal feeds (16) - .0026 - .064 ipr
Cross feeds (16) - .0013 - .032 ipr 
Metric threads (30) - 4 to 7.2 mm
Inch threads (32) - 4 to 56 tpi
Bed length - 66" 
Tailstock taper - 3 MT
Tailstock spindle travel - 4-3/8"
Tailstock spindle diameter - 1-5/8"
Floor space - 71" x 18" x 46" 
Weight, approx - 1364 lbs.

Equipped with: 
3-Jaw Chuck 
Face Plate
Taper Attachment 
Steady Rest
Follow Rest
Dead Center 
Change Gears 
Threading Dial 
Back Splash Guard 

Specifications subject to independent verification by the buyer. 
This lathe is in good operating condition and can be inspected under power. 
Buyer pays shipping. Add $300 if skidding is required for transport.