Weldomat CH6-2437, 1999 Refurbished 2019

“System Contactomat CH” with horizontal tape feed. Contact Range tape width 1.20-3.50 mm tape heigth 0.30-1.00 mm cross section 0.050-2.60 mm2 round wire 100-2.20 mm range of contact length 0.60-3.50 mm Output up to 600 contacts/minute according to 300 contacts per welding unit

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Weld Technology: Resistance welding by inverter welding process with 1’000 Hertz technic, with following advantages:

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Large bonding area regular welds fine adjusting welding program facility prevent flashing monitoring of the welding current

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,CHARACTERISTICS: -cam controlled working cycle -adjustable contact length through a good accessible screw -each contact is cutted and feeded individual to the welding point -parallel guide of the upper electrode disc with excellent heat dissipation and indexing holes for fast changing of position of the electrode – free positioning of the contact till 40 mm from the bord of the strip -position of the welding unit movable in an angle of 0-90 degrees in relation to the strip feed direction -welding of contacts on top or below side of the strip -driven contact tape reel to obtain regular contact length SEQUENCE OF OPERATING: -advance and positioning of the prepunched strip -advance of the tape with adjustable contact length -cutting off the contact from tape, on the outgoing side of the cutting die -feeding of the cutted single contact to the electrode through a pusher -exact positioning of the contact into the slot of the electrode disc sideways and lengthway to an adjustable stop -see the function flow chart -welding of the contact

All specifications are assumed to be correct but must be confirmed by the purchasing entity.