NEW 70 TON X 6' GMC MODEL HPB-7006CNC-3R HYDRAULIC 3-AXIS PRESS BRAKE
- ISO 9001 certified
- Meet OSHA and CE safety standard
- ESA (Italy) Model 630, 3 Axis CNC Controller
- Die library, offline programming, stores thousands of programs
- Programmable Angle/ Angle Correct
- 10” Touch screen
- 3 Axis CNC Graphic Controller
- Y axis Ram with high precision linear encoder
- X servo Back gauge
- R programmable Back gauge height
- Line by line coding
- 2D Graphic Drawing Mode
- Bend Sequence Optimization for collision detection
- Spread Length Calculation
- Germany Rexroth hydraulic system
- Yaskawa Servo motor and Drives
- Schneider electrical components
- All steel construction for maximum rigidity
- Hydraulic logic system centrally located and quiet
- Safety type foot pedal with handle and E-stop switch
- Safety 24V low voltage & overload protection
- One year industrial warranty for parts
STANDARD EQUIPMENT
- ESA (Italy) Model 630, 3 Axis CNC Controller
- (2) 24” front support arms, Quick Release for easy positioning
- Quick release segmented (American Style Tooling) punch holder
- Full Length Gooseneck Punch HRC 50 ( Punch is rated for 10 gauge and lighter .062” radius punch) Additional Tooling may be required for thicker materials and purchaser’s specific products/parts - Ask your dealer for custom tooling quotes)
- Full Length Vee Die with 6 assorted sizes HRC 50
- Lntech Light Curtain System
- Side and Back Safety Fence
- Movable Foot Pedal with Estop meet OSHA safety standard
OPTIONAL EQUIPMENT
- For ¼” tooling: Need single V die holder $1,595.00
-
4’ of punch and 2.5” single V Die , Flame hardened with safety tang $2,550.00
- On-site training, one day…………………………….. $4995.00
Maximum Pressure |
70 Tons |
Bending Lenght Capacity |
80" (6'8") |
Distance Between Uprights (housing) |
63" |
Ram Stroke Travel
Cylinder Travel Adjustment (max)
|
6"
3 1/8"
|
Table Width |
6" |
Distance Between Table and Ram
Max Stacked Tooling Height
|
15 1/4"
8-1/2"
|
Throat Depth |
10" |
Back Gauge Distance |
24" |
Back Gauge Repeatability |
.0039" |
Y-Axis Repeatability |
.0039" |
Approach speed, inch / second
Working speed, inch / second
Return speed, inch / second
|
3.14”
0.35”
2.36”
|
Main motor:
Servo motor for back gauge:
Servo motor for bending angle
setting
|
7-1/2 HP, 3 Phase 30 AMP
Prewired: 220VAC (+/- 10%)
1 HP, 3 Phase
220VAC (+/- 10%)
1/2HP, 3 Phase
220VAC (+/- 10%)
|
Hydraulic oil tank capacity:
Recommended Oil:
|
52 Gal.
Hydraulic Oil Shell #68HD
|
Machine weight:
Machine size, L x W x H:
Shipping Dimensions:
|
8,650 LBS
103" x 63" x 87”
109"x66"x98"
|
Warranty for Rotary Phase Convertor Users : Electrical Parts Warranty is not available if A Rotary Phase Convertor is used. Mechanical parts warranty only
Note: the following models do not work with rotary phase converters:
All EPS models, HS-0825E,HS-0425E, HS-0625E,HS-1010E, HS-1025E, HBB-1010NC, GML-(ALL LATHES)
HPB-4504CNC, HPB-7006CNC, HPB-7006CNC-3R, and HPB-3305CNC
These models listed above cannot run on any phase converters, Warranty will be voided.
GMC will pre-wire the Phase converter to our machine and it is ready to use.
|