10" x 50" KENT USA KTM-3VVK MANUAL KNEE MILL - NEW
PRODUCT FEATURES
- 3 HP spindle motor, mechanical infinitely variable speed head
- 10” x 50” (Opt. 10″ x 54″) hardened and ground table top
- Table, saddle, and knee with hardened and ground dovetail ways
- Precision ground leadscrews with backlash compensating double nut
- Precision bored and ground milling head, with super precision ABEC-7 bearings
- Meehanite castings, with built in coolant reservoir in machine base
- Centralized one-shot lubrication, with metered check-valves
- Variable Frequency Drive
- Digital RPM Display
- Load Monitor
OPTIONAL ACCESSORIES
- DRO system
- Table (X-Axis) Power Feed
- Saddele (Y-Axis) Power Feed
- Knee (Z-Axis) Power Feed
- Air Power Drawbar
- Flood Coolant System
- Chip Tray
- Right Angle Milling Attachment w/ Arbor Support
- Rustlick Coolant (1 Gal., Mixes 1:30)
- Riser Blocks (4″/6″/8″)
- Angle-lock Vises (6″/8″)
- Rotary Table
- Clamping Kit (52pc)
- R-8 Collet Set
- Single Phase Motor Option
- NMTB-30 Spindle
- Table Size
- Table Travel (X-Axis)
- Saddle Travel (Y-Axis)
- Knee Travel (Z-Axis)
- Quill Travel
- Ram Travel
- Spindle Motor
- Spindle Speed
- Spindle Taper
- Quill Diameter
- Quill Feed Rate
- Drilling Capacity (Manual / Power)
- Boring Capacity
- Milling Capacity
- Maximum Work Load (Center)
- Spindle Nose to Table Surface
- Spindle Center to Column
- Net Weight
- Gross Weight
- Shipping Dimensions
- Power Requirements
- 10" x 50" (Opt 10" x 54")
- 35"
- 15.25"
- 15"
- 5.5" (4" w/MillPwr-3 CNC Control)
- 22"
- 3 HP
- 60–500-4200 RPM (Var)
- R-8
- 3.375"
- 0.0015" / 0.003" / 0.006" in/rev
- 0.75" / 0.37" diameter
- 6" diameter
- 2.0 in³/min
- 850 lbs
- 2.75" - 17.75"
- 5" - 27"
- 3000 lbs
- 3100 lbs
- 72" x 72" (skid)
- 220 Volts. 3 Phase, 60Hz, (10 Amp (Optional 440V, requires 5 Amp)
|
No files or videos to display
