GENERAL SPECIFICATIONS: MANUFACTURER - STAMCO YEAR - 1987 MATERIALS - HRP&O, COLD ROLLED, & COATED STEELS COIL WIDTH - 60" (NOMINAL) THICKNESS - .125" MAX., .024" MIN. COIL WEIGHT - 60,000# MAX. (ENTRY & EXIT) COIL OUTSIDE DIAMETER - 77" MAX. (ENTRY), 73" MAX. (EXIT) COIL INSIDE DIAMETER (ENTRY) - 20" to 32" (w/ RUBBER SPACERS) COIL INSIDE DIAMETER (EXIT) - 20" or 24" SLITTER ARBOR DIAMETER - 6.000" NUMBER of SLITTER HEADS - TWO (2) SLITTER HEAD EXCHANGE STYLE - POWERED INJECTOR w/ SLIDING STORAGE TRAY LINE SPEED - 0 to 800 FPM (VARIABLE) UNCOILER DRIVE - ELECTRIC FEED-UP w/ WATER-COOLED BRAKE SLITTER DRIVE - 75 HP RECOILER DRIVE - 100 HP LINE DIRECTION - LEFT to RIGHT LINE COMPONENTS: FOUR (4) ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ FEED-UP DRIVE & WATER-COOLED BRAKE POLY COVERED HOLD-DOWN ROLL w/ FEED-UP DRIVE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS w/ FEED-UP DRIVE ENTRY CROP SHEAR w/ THREADING TABLE AND SCRAP CART THICKNESS GAUGE w/ TRAVERSING C-FRAME ROLLER TYPE SIDE GUIDES w/ POWERED WIDTH ADJUSTMENT SLITTER ANTI-FLUTTER ROLLS INJECTOR HEAD SLITTER w/ 6.000" ARBORS & 75 HP DRIVE SPARE INJECTOR HEAD SLITTER w/ 9.000" ARBORS SLITTER HEAD STORAGE & TRANSFER TRAY w/ TWO (2) POSITIONS ONE (1) LOT of SLITTER & SEPARATOR TOOLING SLITTER EXIT PASS LINE ROLL TWO (2) HEAVY-DUTY SCRAP WINDERS (LOCATED on DRIVE SIDE) ENTRY PIT THREADING TABLE EXIT PIT THREADING TABLE SYNCRO-WIND TENSION STAND w/ PADS AND POLY COVERED ROLLS EXIT PASS-LINE ROLL w/ PIVOTING RECOILER THREADING TABLE CANTILEVERED MANDREL RECOILER WITH 20" HYDRAULIC DRUM & 100 HP DRIVE HEAVY-DUTY RECOILER DRUM OUTBOARD SUPPORT 24" DIAMETER SPEED-LOADING RECOILER FILLER PLATES (STEEL) FLOOR LEVEL COIL UNLOADING CAR OPERATOR CONTROL STATIONS AC CONTROL PANELS VARIABLE SPEED DRIVE PANELS CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM