Haas VF-4 VMC, 2021 – Probe, Chip Auger, TSC Ready

Table Size: 52″ x 19.5″ Table Load Capacity: 3,500 LBS X Axis Travel: 50″ Y Axis Travel: 20″ Z Axis Travel: 25″ Spindle Taper: 40 Spindle Speed: 8100 RPM Spindle Motor: 30 HP Rapids (X, Y, Z): 1000 IPM ATC: 20 Machine Weight: 12,500 LBS

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Equipped With: Haas CNC Control Chip Auger Through-Spindle Coolant Ready Programmable Air 8M WIPS Probing Automatic Air Gun Macros Rotation and Scaling Rigid Tapping M19 Spindle Orientation VPS Editing Media Display Compensation Tables 1GB Max Memory Wireles Networking

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,This used 2021 Haas VF-4 VMC is a 40 taper vertical machining center with 50″ x 20″ x 25″ travels, an 8,100 RPM spindle driven by a 30 HP motor, and a 20 station tool changer. Carrying the Low Hours badge, this pre-owned Haas VF-4 comes equipped with a Renishaw probe, a chip auger and a through-spindle coolant ready setup.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Start with the equipment list. The Renishaw probe lets you pick up part locations on the machine instead of indicating by hand. The chip auger moves chips out of the enclosure. Read the coolant line carefully: the machine is through-spindle coolant ready, which is not the same as having a TSC system installed. Programmable air and an auto air gun are also included, and everything runs through the Haas CNC control.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Now the VF-4 specs. The 52″ x 19.5″ table is rated for 3,500 lbs. X travel is 50″, Y is 20″ and Z is 25″, which leaves vertical room for vises and fixtures under the spindle. Rapids are listed at 1,000 IPM on all three axes. The 40 taper spindle tops out at 8,100 RPM, and the 20 pocket ATC holds enough tools for multi-operation jobs. The 50″ X axis is the number to check first, since it decides how long a part, or how many vises, fit along the table.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,A VMC this size mills, drills and taps parts, and the long table suits longer workpieces or several vises lined up in a row. Job shops, contract machinists and production departments commonly run 40 taper vertical machining centers in this class.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,This VF-4 has 50″ of X travel, 20″ of Y travel and 25″ of Z travel on a 52″ x 19.5″ table rated for 3,500 lbs.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,It is listed as through-spindle coolant ready, not with a TSC system installed.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,A 40 taper spindle rated at 8,100 RPM with a 30 HP motor, paired with a 20 station tool changer.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Comparing options? See this 2022 Amera-Seiki VTC-5 VMC with through-spindle coolant, the 2022 Doosan BVM 5700 VMC, or a newer 2024 Haas VF-4 VMC, 4th axis ready.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.