Barnes DV4-28 Coolant Filtration System, 2020

This vacuum filter was designed to support the following application:

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Fiberglass Machining (but also rated to operate on Steel Grinding) Water soluble coolant To delivery 140 gpm @ 35 psi to the machine inlet. Filtration level – 20-micron average when using only disposable roll media, 5-micron average when using cellulose on top of the roll media.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Primary Filtration: Disposable Roff Media Vacuum Filter Primary Filtration: One (1) #DV4-28 Vacuum Filter Filter Area-GPM/Ft.2: 28 ft.2 operating at 5.7 gpm/ft.2 at 160 gpm Filtration rate (Filtration rate includes internal Filter System requirements/Index Tank refill) Filter Tank: (Approx.) 4’4″ inside width x 4′ side ht. Index Capacity: 1,580 gal., Brim Full Index Tank Capacity: 168 gal. useable in 1.05-Minute Retention Vacuum Break/Index: 4″ dia., automatic, pneumatic actuated 3-way butterfly valve Conveyor/Drive: 1 HP motor w/ direct headshaft mounted reducer and prox switch overload detection. Conveyor includes: CA-550 Chain with welded cold roll Steel Bar Flights Chain pitch at 6’6″:

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Primary Media System: Roll Type Disposable Media Ramp/Discharge Features:

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Outboard Media Wing with one (1) roll operating (no spare roll storage space).

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Low Media limit switch detection.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,460 Volt / 3 Phase / 60 Hz

All specifications are assumed to be correct but must be confirmed by the purchasing entity.