(2) EVA Film Production Lines – Roughly 13 Years Old

1. Chemical Compounding Description: Chemicals compounded in a reactor to create additives used in the formation of blending chip

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,2. Raw Material Handeling Description: Additives and EVA resin mixed in a mixer to create blending chip

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,3. Extruding Description: A formation of EVA sheet is extruded during this process and conveyed onto Horizontal Roll

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Output Max.: 1200 kg/hr Zone: 7 Zones Screw Diameter: 143.4 cm

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,4. Casting Description: Extruded EVA sheet is cast onto Horizontal Roll, which then stretches out the product

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,R1 (Rubber): Ø ×l Ø 614×2900 R2 (Casting): Ø ×l Ø 900×2200 R3: Ø ×l Ø 600×2200 Guide Roll: Ø ×l Ø 150 x2200

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,5. Annealing Description: By heating and cooling down EVA sheet, heat shrinkage feature is effectively reduced

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,6. Embossing Description: EVA sheet is embossed with Vertical Roll to enhance vapor permeability

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,7. Thickness Measuring Description: Thickness measurer identifies outliers and alerts to a supervisor in real time

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,8. Detecting Description: With detecting cameras, foreign materials on every product can be alerted to a supervisor in real time

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,9. Slitting Description: Completed sheets can be cut into half or into any size as instructed

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,10. Reclaiming Description: Scraps from slitting process are sent back to be reused as raw materials

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,11. Winding Description: Slittered sheets are winded up by a winder and then transferred to packaging

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Speed Max.: 50m/min Before Trimming: 1000 ~ 2700mm After Trimming: 900 ~ 2500mm Wind Thickness: Max. 1000mm Maximun Wind Wight Max.: 1400 kg/Roll

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,12. Packaging Staff: 4 F/T, 12 Temp. Description: Finished products are packaged in the packaging area and transferred to the warehouse

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Vendor: Toshiba, Fujitekko Sheet Thickness: 0.4~0.7mm Production Speed: 40m/min Main Weight Feeder: 500 ~ 1200 kg/hr Sub Weight Feeder: 50 ~ 250 kg/hr

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Roughly 13 Years Old, Only Used For ~6 Years

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Willing To Sell Lines Separately Contact Us For Individual Pricing

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,More Specs Available Upon Request

All specifications are assumed to be correct but must be confirmed by the purchasing entity.