2015 3D Systems sPro 140 SLS 3D Printer with Rapid Change Module & Full Powder System

Capacity Build volume: 550 × 550 × 460 mm (22 × 22 × 18 in)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Performance Layer thickness: 0.08–0.15 mm (80–150 µm), resolves down to ~100 µm Scanning speed: 400 in/s (10 m/s) Volume build rate: 185 in³/h (3.0 L/h)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Control Imaging system: ProScan Standard digital

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Accessories 70 W CO₂ laser; nitrogen generator; powder recycling station; two rapid-change modules; intelligent powder cartridge (empty); breakout station with airflow dust collector; laser chiller

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Utilities Electrical: 208 V, 3‑phase, 50/60 Hz

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Dimensions Overall footprint: approx. 2 130 × 1 630 × 2 410 mm (84 × 64 × 95 in); weight ~2 224 kg (4 903 lb)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Installed Options Nitrogen generator Powder recycling station (Empty) intelligent powder cartridge Breakout station with airflow systems dust collector 2 rapid-change modules Laser chiller

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Feature spotlight High-throughput industrial SLS: Robust 70 W CO₂ laser and ProScan imaging deliver production-grade output. Large build area: Full 550 × 550 × 460 mm build envelope supports nesting of multiple end-use parts. Operational efficiency: Rapid-change modules plus integrated powder recycling reduce downtime and material waste. Hybrid utility support: Includes nitrogen generator, dust-collector breakout station, chiller—ready for turnkey setup.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.