CAPACITIES:

Maximum Turning Diameter 25.59"
Maximum Distance Between Centers 59.05"
Main Spindle Speed Range 3800 RPM
Milling Speeds 12,000 RPM
Spindle Nose & Sub Spindle JIS A2-8
X-Axis (Upper) 27.36"
X-Axis (Lower) 9.25"
Y-Axis Travel +/- 11.8"
Z-Axis (Upper) 62"
Z-Axis (Lower) 60"
W-Axis (Sub Spindle) 60"
C-Axis Indexing 0.001 Degree
B-Axis Indexing -30 to +210/.001 Min Angle
Spindle Bore 3.15"
Main Motor 30 HP/ 20HP
Rapid Traverse XA/ZA 1,968 IPM
Rapid Traverse ZB/Y 1,574 IPM
Rapid Traverse XB 980 IPM

Equipped With:

OSP-P300SA CNC Control
15" 3-Jaw Kitagawa Chuck (Main)
12" 3-Jaw Kitagawa Chuck (Sub)
80-Station Tool Changer (CaptoC6)
Big Bore
Auto Gauging Renishaw RMP600 Capto C6
Auto Door w/ Dual Cycle St
C-Axis
Touchsetter A for 2S Y-Axis Gauging
C-Axis Auto Zero Off (L or R)Feed Hold During Threading
Helical Cutting for X-C-Z
Inverse Time Function
Off-Center Turning Function
Thread Start Point Off-Set
Variable Spindle Spd Threading
Prep for Mist 6 STD Lathe
Shower Coolant Niagara B Type Renishaw Plus Software
MP Systems High Pressure Coolant
MP Systems Mist Collection System
Chip Conveyor
HOURS:

1,738 Hours

Note:


Inspect In Plant Under Power