2011 RMS MODEL #611 (160 TON) HYDRAULIC REBAR SHEAR WITH

BAR FEED SYSTEM

RMS (REBAR MACHINE SERVICES) SHEAR:

YEAR NEW ................. 2012

MODEL .................... 611

MAX REBAR CAPACITY ....... #18 BAR (2.25")

REBAR CAPACITIES (GRADE 60):

#18 REBAR ................ 2 BARS

#14 REBAR ................ 4 BARS

#11 REBAR ................ 10 BARS

TONNAGE CAPACITY ......... 160 TONS

MAIN CYLINDER ............ 12" BORE

HOLD DOWN CYLINDER ....... 3-1/4" BORE

BLADE LENGTH ............. 18"

INFEED LIFT TABLE ........ YES

TANK CAPACITY ............ 60 GALLONS

PUMP CAPACITY ............ 45 GPM

MAIN PUMP MOTOR .......... 30 HP

AUTOMATIC BAR FEED / EXIT SYSTEM

Stock Table…

The Stock Table (entry table) consists of a 40 foot long powered 12 inch

conveyor. A stock rack is supplied on one side of the conveyor with shakedown

directly on to the conveyor. Rolls are belt driven by means of Kevlar lined Vbelts.

Gauge Table…

The Gauge Table consists of a 10 foot long powered 12 inch conveyor, three

preselectable storage pockets on one side of the conveyor, together with an air

kickoff system. Foot stops are positioned at 12 inch increments for the first

ten feet and then at two foot increments thereafter. The table can also be

expanded, in length, or by adding bin pockets to the opposite side.

CONTROLS

RMS PROGRAMMABLE MICRO CONTROLLER & OPERATOR STATION

Control System…

 Micro controller that will allow the operator to run the entire Shearline and

shear from one central point.

Shear…

 The 611 includes 12 inch wide blades and a five foot entry drop table.