Consisting of the following:

-Uncoiler: Cincinnati

  60" x 30,000 lbs. Capacity

  Serial Number:  6458E 12910A 

  Serial Number:  HDR-787 & HDR-788

  60" Mandrel Face 

  16" - 20" ID 

  72" OD  

  Full Length Holddown Roll

  Slide Base 

  Wichita Brake 

  50" from Floor to center of Mandrel 

-Entry Unit:

  Peeler Table 

  Pinch Rolls 

  Side Guides 

  Crop Shear - Serial Number 6458E 12908

-Slitter Head:

  Drop In Type Slitter Head - Single Eccentric Design 

  Model GII 7.5x52 L Slitter - Serial #6458E 12910-B, 

   7.5" Dia. x 55.5" Face Arbors 

  Comes with 3 sets of Shimmed Tooling & Knives

   approx. 11.75" OD and 12.25" OD.

  Slitter Drive - 100 HP DC Motor, 500 V., 850/255 RPM with Drive (TBD) 

   Gearbox rated at 125 HP,  3.38:1 Ratio, 1750 RPM Input, 520 RPM Output, 

   Serv. Factor 1 

-Oscillating Scrap Winder:

  13" Wide x 44" Dia. Spool 

  Oscillating Design 

  Rear Discharge / Dump 

-Pit Cross Over Table:

-Drag Board Tension Stand:

  Serial Number:  1592S 10021A 

  60" Face 

  Separator Tooling Bar with set of Separator Spacer Tooling 

   and Discs.

-Recoiler:

  Serial Number:  1050M-7149A-B

  20,000# x 56" capacity 

  16" ID with Pads for 20" 

  40" from CL of Mandrel to floor 

  75 HP DC Motor, 500 V., 850/2000 RPM to a Turner Uni-Drive 2:1 & 1:1 

   Ratios & 20.93:1 Ratio to a Loopco Reducer, 650/1950 RPM Input, 

   31.3/93.9 Output.

-Coil Car:

  Serial Number:  1592 S 10023A 

  20,000 lbs. Max. Weight Capacity 

  40" Wide Deck with extension beyond 

  33" from CL of "V" to Side Mast 

-Removed and in storage: Detroit, MI.