Revolutionize Your Business with Machine Hub Software! Learn More
Model 26 Gleason Hypoid Gear Generator
Brand
Category
Model
26
Stock #
gh26dx
Year
Not specified
Condition
Used
Location
Michigan
| Max Offset Below Center | 4-1/2" |
| Max. Distance from Machine Center to Nose of Spindle | 23-1/2" |
| Min. Distance from Machine Center to Nose of Spindle | 5" |
| Cutter Speeds-Feed Per Minute | 35-200 |
| Feed (sec./tooth) | 25-333 |
| Main Motor - 2 Speed | 7.5 HP |
| Floor Space | 132" x 101" |
| Net Weight | 25,300 lbs |
| Maximum Diameter Gear | 33" |
| Cone Distance Max (30 deg. and 18" Cutter) | 16-1/2" |
| Max. Pitch Angle: Shaft at 90 Deg | 84 Deg. 18' |
| Min. Pitch Angle | 5 Deg. 42' |
| Extreme Ratio | 10:1 |
| Max Face Width | 4" |
| Diametral Pitch | 1-1/2 |
| Diameter of Taper Hole at Large End | 6" 152mm |
| Taper Per Foot | 3/4" 19mm |
| Depth of Taper | 6", 152mm |
| Diameter of Hole Through | 5" 127mm |
| Spindle Nose to Machine Center | 9-1/4", 235mm |
| Cutter Diameter | 9", 12", 16", 18" |
| Max Offset Above Center | 4-1/2" |
|
Modified Roll. Hydraulic Work Holding. Draw Bar. Coolant System. Change Gears. Cutter Bodies Available.
This machine is being offered cleaned and cycled. It is being offered with a 30-Day Return Privilege and can be inspected at your convenience. |
|
No files or videos to display
