Revolutionize Your Business with Machine Hub Software! Learn More
Gleason Model 106 Hypoid Gear Generator
Brand
Category
Model
106
Stock #
GH1073
Year
1988
Condition
Used
Location
Illinois
| Cone Distance Max (30" Spiral Angle & 7-1/2" Cutter) | 4-1/4" |
| Gear Pitch Diameter Max | 10 to 1 |
| 10 to 1 Ratio | 8 - 1/2" |
| 2 to 1 Ratio | 7 - 1/2" |
| 1 to 1 Ratio | 6" |
| Diametral Pitch (Coarsest) | 4 |
| Full Depth Max | .625" |
| Face Width Max | 1 - 1/4" |
| Number of Teeth | 5 to 150 |
| WORK SPINDLE | : |
| Diameter of Taper Hole at Large End | 3 - 29/32" |
| Taper per Foot | 89/64" |
| Depth of Taper | 6" |
| Diameter of Hole Through Spindle | 2 - 7/16" |
| Diameter of Spindle Nose | 5 - 11/82" |
| Cutter Diameter | 3 - 1/2", 4 - 1/2", 5", 6", 7 - 1/2" |
| WORK HEAD | : |
| Offset Above Center Max | 8" |
| Offset Below Center Max | 8" |
| Distance from Machine Center to Nose of Spindle Max | 9" |
| Distance from Machine Center to Nose of Spindle Minimum | 1 - 1/4" |
| Cutter Speeds | 54 - 418 RPM |
| Feeds (seconds per tooth) | 5 - 73 seconds |
| Feed Motor | 5 HP, 1800 RPM |
| Hydraulic Motor | 1 HP, 1800 RPM |
| Coolant Motor | 1/2 HP, 8600 RPM |
| Floor Space | 84" x 61" |
| Net Weight | 15,500 lbs |
|
EQUIPPED WITH:
Completer with Helical Motion and Roll Centering. Hydraulic Chucking. Change Gears. Automatic Stop Counter. Stock Divider. Coolant with Magnetic Chip Separator. Drawings. |
|
Watch https://youtu.be/AIWGaeXWHlk
