KNUTH "HPS H" IRONWORKER

Brand

KNUTH

Category

Punching Equipment

Type

Ironworkers

Model

HPS H

Stock #

16195

Year

Not specified

Condition

New

Location

Not specified

Specifications
Files & Videos

	HPS 45 H	HPS 60 H	HPS 65 H	HPS 85 H	HPS 115 H	HPS 175 H
Working Area
Number of hydraulic cylinders	1 positions	1 positions	2 positions	2 positions	2 positions	2 positions
Punch press
Pressure force	49.5 t	66 t	71.5 t	93.5 t	126.5 t	192.5 t
Punch capacity (max.)	0.87x0.59 in	1.1x0.59 in	1.02x0.79 in	1.3x0.79 in	1.34x1.02 in	1.57x1.26 in
Diameter x thickness	1.5x0.3 in	1.5x0.4 in	2.2x0.4 in	2.2x0.5 in	2.2x0.6 in	2.2x0.9 in
Throat	7 in	9 in	12 in	14 in	16 in	25 in
Stroke	1.4 in	2 in	2.2 in	3.1 in	3.1 in	3.1 in
Stroke number (at 20 mm stroke)	20	25	25	25	25	22
Working height	37 in	37 in	40 in	42 in	42 in	44 in
Steel cutter
Cutting capacity flat (max. width)	11.8x0.5 in	11.8x0.6 in	14.8x0.6 in	18.9x0.6 in	23.6x0.6 in	23.6x0.8 in
Cutting capacity flat (max. thickness)	8x1 in	8x1 in	12x1 in	15x1 in	15x1 in	15x1 in
Knife length	13 in	13 in	15 in	19 in	24 in	24 in
Cutting capacity round	1 in	2 in	2 in	2 in	2 in	3 in
Cutting capacity square	1 in	1 in	2 in	2 in	2 in	2 in
Steel cutter working height	37 in	37 in	35 in	37 in	36 in	36 in
Profile cutter
Cutting capacity 90¡	3.9x3.9x0.4 in	4.7x4.7x0.5 in	5.1x5.1x0.5 in	5.9x5.9x0.6 in	6.3x6.3x0.6 in	7.9x7.9x0.8 in
Cutting capacity 45¡	2.4x0.2 in	2.8x0.3 in	2.8x0.3 in	3.1x0.3 in	3.1x0.3 in	3.1x0.3 in
Profile cutter working height	44.68 in	44.49 in	44.49 in	46.85 in	46.85 in	45.67 in
Notcher
Plate thickness (max.)	0.31 in	0.39 in	0.39 in	0.51 in	0.51 in	0.63 in
Width	1 in	2 in	2 in	2 in	2 in	3 in
Depth	4 in
Drive Capacity
Motor rating hydraulic pump	5.4 Hp	5.4 Hp	7.4 Hp	10.1 Hp	14.8 Hp	14.8 Hp
Measures and Weights
Overall dimensions (length x width x height)	53x31x58 in	58x31x63 in	67x31x70 in	74x31x75 in	81x31x80 in	111x43x88 in
Weight	2,640 lbs	3,080 lbs	3,740 lbs	4,950 lbs	6,930 lbs	12,650 lbs

Flat Steel Cutters

For strip steel, flat steel, wide flat steel
Table with angular and linear stops
Adjustable hold-down
Lower knife provides 4 cutting edges

Angular Profile Steel Cutters

For angle steel sections
Cut angle 90¡ and 45¡
Adjustable material guide plate

Rod Steel Station

For round and square steel
Robust material guide plate

Back Gauge

Including swivel boom
For use on Flat Steel, Angular Steel and Rod Steel Stations

Hole Punch Station

For punching round holes and slots in sheet metals, flat steel and U-section steel
Table with adjustable angular stops
Infinitely variable stroke adjustment
Premium Kingsland tools
Hydraulic overload protection

Notching Station