NEW SHARP SV-2517S-F BOX WAY CNC VERTICAL MACHINING CENTER
- 25” x 17” x 18” travel
- Hardened and ground Box ways with TURCITE coating
- 8,000 rpm, CAT 40 spindle
- 16 tools carousel type ATC
- Fanuc Oi-MF control panel with embedded Ethernet, RS232 port, USB port and Flash Drive port. (standard)
- Pre-tensioned, double anchored, ball screws mounted on high precision angular contact bearings (ABEC 7), eliminate chatter and vibrations during heavy cutting.
- Vertical head is equipped with 2 adjustable coolant nozzles, one adjustable air nozzle, 4 coolant openings and 4 air curtain openings under the spindle. There is also the air purge system that blows out chips at each tool change (standard)
- Chip wash nozzles are installed at each side of machine base (standard)
- Rigid taping, auto lube, thermal control system, coolant gun, air gun, interlock doors (standard)
- Machine wt. 8,200 lbs
Box Way Vertical Machining Center |
SV-2517SE-F |
Work Capacity |
Travel X,Y,Z |
25.2" x 17.1" x 18.1 |
|
|
Spindle Nose to Table |
3.1 - 21.2 (S-F, SE-F) |
Spindle Center to Column |
19.3" |
Work Table |
Table Area |
27.5" x 16.5" |
Spindle |
Spindle Taper |
CAT 40 |
Spindle Max. Speed |
8,000 rpm |
Driving Type |
Belt Drive |
Motor (30m/cont.) |
10 / 15 HP (7.5 / 11 kw) |
Automatic Tool Changer (ATC) |
Magazine type |
Side Mount |
Magazine Capacity |
24 |
Max. Tool Diameter |
3.9" |
w/o adj. tool, max dia. |
5.9" (150mm) |
Max Tool Length9.8" |
|
Max Tool Weight |
15.4 lbs (7kg) |
Air Blast at Tool Change |
Standard |
Motion |
Cutting Feed Rate |
0.04 - 393.7 IPM |
Rapid Traverse |
X / Y / Z: 787 IPM |
Accuracy |
Positioning Accuracy |
0.00016 " |
Repeatability Accuracy |
0.00012 " |
CNC Control Features |
Controller |
Fanuc Oi-MF |
|
|
Programming Assist |
Manual Guide |
4th Axis Support |
Standard |
Screen Size |
8.4 LCD |
Coolant System |
Flood Coolant Nozzles |
2 |
Coolant Tank Capacity |
42 gal. |
Chip Pan |
Standard |
Power Requirement |
Electrical |
220V/3 Phase/20 KVA/60 Hz |
Air |
6 CFM @ 88 psi |
Machine Measurements |
Floor Space |
80" x 87" |
Height |
99" |
Door Opening |
28.4" |
Weight |
8200 Lbs |
STANDARD ACCESSORIES
- Fanuc Oi-mate-MF control and drives with ; USB port, 512 K memory, Embedded Ethernet, RS-232C interface, 4 additional M codes, M30 Auto Power Off
- Full metal enclosure with 2 large side doors
- Coolant system with enlarged coolant tank
- Coolant gun
- Auto lubrication system
- Rigid tapping
- Air gun
- Removable electronic hand wheel (MPG)
- Door interlock
- Chip pan
- Air accumulator
- Heat exchanger for electric cabinet
- Florescent work light
OPTIONAL ACCESSORIES
- 4th axis software from Fanuc
- 4th axis kit prepped ( electrics, cables unit)
- 4th axis with rotary table (complete with drives, motor)
- Scrapper type chip conveyor
- Hinge type chip conveyor
- Oil skimmer
- Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
- CTS 20 bar/70 bar (300/1,000 psi) pump with tank
- Tool Probe (Renishaw TS27R)
- Tool Setter (Renishaw OMP40
|