NEW SHARP SVL-2416SE-F LINEAR WAY CNC VERTICAL MACHINING CENTER
- 24” x 16” x 18” travel
- Linear way construction
- 1890 in/min (48M/min) rapid traverse
- 10,000 rpm, BIG PLUS CAT 40 spindle
- 16 tools carousel type ATC
- Fanuc Oi-mate-MD control
- Small footprint
Work Capacity |
Travel X,Y,Z |
24" x 16" x 18.1" |
Spindle Nose to Table |
7.9 - 23.6 |
Spindle Center to Column |
17 |
Work Table |
Table Area |
27.5" x 16.5" |
Spindle |
Spindle Taper |
CAT 40 |
Spindle Max. Speed |
10,000 rpm |
Driving Type |
Belt Drive |
Motor (30m/cont.) |
7.3/10 |
Automatic Tool Changer (ATC) |
Magazine type |
Carousel |
Magazine Capacity |
10 |
Tool Selection Type |
Set Tool Number |
Max. Tool Diameter |
3.9" |
w/o adj. tool, max dia. |
5.9" |
Max Tool Length |
9.8" |
Max Tool Weight |
15.4 lbs |
Air Blast at Tool Change |
Standard |
Motion |
Cutting Feed Rate |
0.04 - 393.7 ipm |
Rapid Traverse |
X/Y/Z: 1,890 ipm |
Accuracy |
Positioning Accuracy |
0.00016/0.004 inch |
Repeatability Accuracy |
0.00012/0.003 inch |
CNC Control Features |
Controller |
Fanuc |
Control Model |
Oi-MD |
Programming Assist |
Manual Guide |
4th Axis Support |
Standard |
Screen Size |
8.4 LCD |
Coolant System |
Flood Coolant Nozzles |
2 |
Coolant Tank Capacity |
42 gal. |
Chip Pan |
Standard |
Power Requirement |
Electrical |
220V /3 Phase/20 KVA/60 Hz |
Air |
6 CFM @ 88 psi |
Machine Measurements |
Floor Space |
W: 72.8", w/ side mount 78.2" D: 85" |
Height |
91.5" |
Door Opening |
25" |
Weight |
7,260 lbs |
STANDARD ACCESSORIES
- Fanuc Oi-MD control and drives with ; USB port, 512 K memory, Embedded Ethernet, RS-232C interface, 4 additional M codes, M30 Auto Power Off
- Full metal enclosure with 2 large side doors
- Coolant system with enlarged coolant tank
- Coolant gun
- Spindle Chiller
- Auto lubrication system
- Rigid tapping
- Air gun
- Removable electronic hand wheel (MPG)
- Door interlock
- Chip pan
- Air accumulator
- Heat exchanger for electric cabinet
- Florescent work light
OPTIONAL ACCESSORIES
- 4th axis kit prepped ( electrics, cables unit)
- 4th axis with rotary table (complete with drives, motor)
- Flat type chip conveyor
- Oil skimmer
- Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
- CTS 20 bar (300 psi) pump with tank
- Tool Probe (Renishaw TS27R)
- Tool Setter (Renishaw OMP40
|
No files or videos to display