CATALOG SPECIFICATIONS

Auto-Blast Wheel Diameters:  13"
Auto-Blast Throwing Capacity Per Wheel: 360 LB/MIN
Auto-Blast Throwing Capacity, Total: 720 LB/MIN
Lower Screw Conveyor, Diameter: 9"
Lower Screw Conveyor, Carrying Capacity: 720 LB/MIN
Lower Screw Conveyor Speed, @ 18% Load: 36 RPM
Tote Dumper, Load Capacity: 3000 LBS
Tote Dumper, Line Speed: 3 to 10 FPM
Tote Dumper, Speed: 12 RPM
Elevator Bucket Spacing: 7"
Elevator Capacity, Maximum: 1500 LB/MIN
Elevator Speed: 84 RPM
Mill Assembly, Line Speed: 3 to 10 FPM
Mill Assembly, Speed: 25 RPM
Entrance Conveyor, Width: 16"
Entrance Conveyor, Length.................. 10'
Entrance Conveyor, Line Speed: 3 to 10 FPM
Exit Conveyor, Width: 24"
Exit Conveyor, Length: 8'
Exit Conveyor, Line Speed: 3 to 10 FPM
Lower Screw Conveyor Motor: 3/4 HP
Reclaim Shaker Motor: 3 HP
Tote Dumper Motor: 3 HP
Elevator Motor: 1-1/2 HP
Mill Assembly Motor: 1-1/2 HP
Entrance Conveyor Motor: 3/4 HP
Exit Conveyor Motor: 3/4 HP

EQUIPPED WITH

(2) 15 HP Auto Blast Wheels
Abrasive Recycling System Consisting Of: 8" x 24" Elevator, 20" Seperator, Upper Screw Conveyor Rotary  Screen
10 HP, 3600 CFM Jet Pulse Slide-In Cartridge Type Dust Collector (Model JPSC)
US Filter Tote Dumper
Electro-Mag Vibratory Feeder Mill Assembly
Entrance and Exit Conveyor
Abrasive Adder (4 CuFt, 1100 Lb)
New Spare Parts Including: Motors, Belts, Etc.

NOTE: Machine appears to be in very good condition with a replacement cost of over $350,000.00

F.O.B. Cincinnati, Ohio 45215

PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER