Stewart Bolling 200 Ton Heated Hydraulic Press with 24″ × 34″ × 9″ Platens – Refurbished Controls & Pump

Equipment Overview Well-maintained Stewart Bolling 200 Ton heated platen press, recently decommissioned. Control systems and pump motor replaced ~3 years ago; platens resurfaced; minimal pneumatic/hydraulic issues. Ideal for composite, rubber, or flat sheet forming.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Key Features & Specifications

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,200 US Ton hydraulic press, up‑acting configuration

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Electric-heated top and bottom platens: 24″ W × 34″ D × 9″ T

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Modern control panel: digital temperature controllers for both platens, manual raise/lower, emergency stop

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Hydraulic power unit: replaced pump motor and internal gear pump (approx. 3 years ago)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Platens resurfaced flat within tolerance during last refurbishment

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Pneumatic valve slowly bleeds pressure; minor o‑ring leaks at selected fittings only

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,No external chiller or oil circulation loop included or used

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Minimal prior use dedicated to composite material pressing; low mechanical wear profile

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Structurally sound: cast frame with no observed cracks; clean storage condition

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Electrical upgrade: new transformer, relay/contactors, wiring control cabinet

All specifications are assumed to be correct but must be confirmed by the purchasing entity.