Sumitomo SE 230HS-CI 253-Tons Injection Molding System, 2020

Clamping force: up to 253 tons (2,250 kN)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Mold space: -Minimum: 8.27 inches -Maximum: 22.05 inches Maximum open daylight: 42.13 inches

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Distance between tie-bars: -Length: 36.22 inches -Width: 22.05 inches Maximum mold open/close: 51.18 inches per second Maximum opening stroke: 20.08 inches Locating ring diameter: 4 inches

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Ejector: -Pattern: Center, 7 inches (5 points x 2) -Stroke: 5.91 inches -Force: 4.4 tons Maximum mold weight on moving platen: 1,102 x 2 pounds

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Injection units C510 and C360: -Screw diameters: 40 mm and 25 mm -Screw stroke: 6.3 inches -Maximum injection speed: 11.81 inches per second -Maximum screw speed: 400 rpm -Nozzle contact force: 2.76 tons -Injection unit stroke: 17.32 inches -Hopper capacity: 1,830 x 2 cubic inches

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Overall dimensions: -Length: 252 inches -Width: 70 inches -Height: 79 inches Electrical: 3 Phase, 60 Hz, 230 Volts Machine weight: approximately 37,400lbs

All specifications are assumed to be correct but must be confirmed by the purchasing entity.