EndFlex Poplok AHL-110 Trayformer 2-Tuck Dual Station, 2020 – For Fold & Tuck Trays

Used EndFlex Poplok AHL-110 Trayformer 2-Tuck Dual Station, 2020 – For Fold & Tuck Trays:

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,– Roll over tray type with tuck closure – designed for self locking blanks – Speeds up to 20 Trays/min

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,– Electrical requirements: 120VAC, 1 Ph – Air requirements: 32 SCFM@80 PSI (Air line minimum ID: 1/2″)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,– Omron PLC

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,– No mandrel or tooling for different sizes required

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Standard tray size range: Without lid (formed): – Minimum: 8″ L x 5″ W x 2″ D – Maximum: 21″ L x 15″ W x 5″ D Without lid (knockdown): – Minimum: 9″ A x 16″ B – Maximum: 25″ A x 37″ B

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,With lid (formed): – Minimum: 8″ L x 5″ W x 2″ D – Maximum: 21″ L x 10.5″ W x 5″ D With lid (knockdown): – Minimum: 16″ A x 16″ B – Maximum: 36″ A x 37″ B

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Case or Tray Sizes; Tray #1 Case Size 8.5″L x 6.5″W x 2.5″D Knockdown 20.56″L x 19.38″W

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Tray #2 Case Size 8.5″ x 6.5″ x 6″ Knockdown 30.18″ x 32.38″

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Tray #3 Case Size 12.5″ x 8″ x 6.5″ Knockdown 34.5″ x 36.38″

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,120v 1ph

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,30SCFM @ 80PSI

All specifications are assumed to be correct but must be confirmed by the purchasing entity.