Okuma Genos M460-VE VMC, 2017-Inspection Reports from Gosiger

Max Machining Volume” 30” x 18.11” x 18.11” Table Size: 18.11” x 39.37” Spindle Speed: 15,000 Min Spindle Motor Power: 30 / 25 HP Rapid Traverse (x/y/z): 1,575/1,575/1,262 ipm Magazine Capacity: 32 Power: 220/480 Volt, 3 Phase, 60 Hz

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Equipped With: Okuma OSP-P300MA Control

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,**Have Inspection Reports from Gosiger**

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Machine powered on without any major alarms Had to set the air PSI input in order to move the axis Machine had a battery life alarm due to being out of service, backups performed Axis and spindles operate normally, ran the spindle to 12,000 rpm with normal load and minimal noise

All specifications are assumed to be correct but must be confirmed by the purchasing entity.