9.16.6 Mitutoyo Crysta-Apex Crysta-Apex C9166 CMM, 2005 – Open to Offers

X-Axis Measuring Range: 35″ (900 mm) Y-Axis Measuring Range: 63″ (1600 mm) Z-Axis Measuring Range: 24″ (600 mm)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Mitutoyo/Renishaw Components Controller: Mitutoyo Last Calibration: July 2021

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Resolution: 0.0001 mm (0.1 μm) Guide method: Air bearings on each axis Drive speed – CNC MODE: Drive speed 8 – 300mm/s; max. speed: 519 mm/s J/S MODE: 0 – 80mm/s (J/S Mode: High Speed); 0 – 3mm/s (J/S Mode: Low Speed); 0.05 mm/s (J/S Mode: Fine Speed)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Max. measuring speed: 8 mm/s Max. drive acceleration: Each axis: 1,333 mm/s2, max. combined acceleration: 2,309 mm/s2

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Workpiece – Maximum height: 800 mm – Maximum mass: 1500 kg Mass (including the control device and installation platform): 2868 kg

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Air supply – Pressure: 0.4 MPa – Consumption: 60 L/min under normal conditions (air source: 120 L/min)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Additional Details: -High-Accuracy CNC Coordinate Measuring Machine that guarantees a maximum permissible error of *E0,MPE = (1.7+3L /1000)μm -The machine has a measuring capability of 35” x-axis, 63” y-axis, 24” z-axis at .000004” resolution -This was used to measure parts and provide AS9100 inspection reports automatically -The large dedicated table area enabled high volume production -Brings versatile and diverse part inspection capability as it can measure five of six component sides without moving the part -Specifically it can also aids in reverse engineering capability with insulation components -Excellent for measuring stator housing and core concentricity if wanted -Dramatically reduces AEM’s measuring times to increase efficiency

All specifications are assumed to be correct but must be confirmed by the purchasing entity.