The complete process from turning of the tube ends to marking of the tube is performed fully automatically by one machine ? without any reclamping or cumbersome handling.

Cold-formed tubes generally feature better strength properties than hot-formed ones and no material needs to be removed from the product, as for example in turning. This means that the finished tube has the same wall thickness over its entire length, even at the transitions between different cross-sections.

The benefits at a glance:

* Throughput rate: 30-60 pieces per minute, which is more than ten times the throughput achieved with the previously applied conventional technique
* Tube diameters of up to 50 mm
* Automatic feeding out of a high-capacity storage system
* Markedly reduced HR requirements
* Distinctly lower tooling costs

* 1 Model: Tube Dia: Up to 50mm (2")
* Production output 30 - 60ppm

? Cold forming of tubes with varying cross-section
? One-sided or double-sided symmetrical forming
? Thruput rate: 30 - 60 pieces per minute, which is more
than ten times of conventional technique
? Tube diameters of up to 50 mm | 2?
? Automated feeding from a high-capacity buffer
? Significantly less personnel and tooling costs

Location: