• Variable Speeds to 5000 RPM for better performance in softer materials such as aluminum or brass, High RPM desirable for CNC conversions

• Heavier Class Milling Machine, (1350 LBS With Base) For More Rigidity, And Greater Cutting Ability, yet ships in 2 pieces (Base separately) so it is easier to handle
• Larger Knee Mill-Style Table Handles, for Much Better Control By Hand
• Huge 12" Y axis travel, matched with a 26" X axis travel and generous 20" Z travel allows room for those larger jobs. This machine has a larger work envelope than many full sized knee mills.
• Real Inch Pitch Leadscrews on X and Y Axis, 10 TPI Screws (.100" Per Turn) For Easier Operation - Not a close metric conversion like with many others
• Available With Power Down Feed on Spindle (PDF Model Only) For Boring Operations
• Base is Heavy Duty Cast Iron, For Excellent Vibration Dampening

• Longest In Class, 3 Year Warranty

* ALL Models below now come with knee mill style crank handles for
better feel and easier operation by hand, as shown in main
picture

#1 PM-940V-BASICw/HRDWYS - Great for someone who will convert to CNC, who would remove the X and Z Feed Motors anyway, so it is sold without these. This version has the hardened ways, which greatly extended life, especially when converted to CNC

#2 PM-940V-PDF w/HRDWYS - Includes: Same as #1 but with a Power Down Feed on Spindle/Quill for Boring, Z Axis Positioning Motor on the Mill's Head (used to lift and lower head for positioning, eliminates the need to raise and lower head by hand cranking), X Axis Power Feed on the Mill's Table (All Installed), along with Hardened Ways.

#3 PM-940V-PDF w/HRDWYS&3axDRO - Includes: Same as #2 but with the addition of 3 axis DRO. So this model has all options: 3 Axis DRO, Power Down Feed on spindle, Z Axis Motor on the Mill's Head, X Axis Power Feed on the Mill's Table (All Installed), along with Hardened Ways.

Main Specifications: 

• Table Size: 9-1/2"x40"
• Max. Recommended Table Load Capacity: 400 lbs (Centered)
• Table T-Slot Size and Number: 14mm / 9/16", 3 Slots
• Table Travel, X Axis: 28" Hand Only, 26" w/ Power Feed
• Cross Travel, Y Axis: 12"
• Head Vertical Travel, Z Axis: 20"
• Quill (Spindle) Travel: 5"
• Max. Distance Spindle to Table: 22"
• Table Surface Height from floor, 35" (With base flat on floor)
• Normal Working Max Height: (top of column travel motor) 82" (with base)
• Height with head all the way up: (top of main motor) 85"(with base)
• Stand (Base) Height to machine mounting surface: 24"
• Stand (Base) Dimension at floor approx. 18-1/2"W x 27"D, with 5/8" Bottom Holes for leveling pads/bolts
• Lead Screw Type: Inch Pitch Acme Threads - 10TPI on X and Y Axis
• Spindle Taper: R-8, with 7/16-20 drawbar thread (U.S. Standard)
• Quill Diameter: approx. 3"
• Head Swivel: Side To Side, 90 Degrees
• Power Required: 220 Volt, Single Phase, 10 Amp Supply
• Main Motor Horsepower: 2 H.P. (Motor runs on a VFD for the variable speed) - Current VFD Model used is a Delta VFD, Model # VFD015E21A
• Spindle Speeds: Low 100-1640 RPM, High 350-5000 RPM, Infinitely Variable Within Each Range
• Casting Type: Fine Grain Cast Iron
• Approximate Weight: 1350lbs with Base
• Country of Origin: China
• Warranty: 3 Years
• Cord Connection/Type: Cord approx. 5' length, User to supply plug needed for your outlet (20A 240V With Ground, No Neutral Required)