• Heavier Class Milling Machine, (1350 LBS With Base) For More Rigidity, And Greater Cutting Ability, yet ships in 2 pieces (Base separately) so it is easier to handle
• Larger Knee Mill Style Table Handles, for Much Better Control By Hand
• Huge 12" Y axis travel, matched with a 26" X axis travel and generous 20" Z travel allows room for those larger jobs. This machine has a larger work envelope than many full sized knee mills.
• Real Inch Pitch Leadscrews on X and Y Axis, 10 TPI Screws (.100" Per Turn) For Easier Operation - Not a close metric conversion like with many others
• Available With Power Down Feed on Spindle (PDF Model Only) For Boring Operations
• Base is Heavy Duty Cast Iron, For Excellent Vibration Dampening
• Longest In Class, 3 Year Warranty

* ALL Models below now come with knee mill style crank handles for
better feel and easier operation by hand, as shown in main
picture

#1 PM-940M-BASICw/HRDWYS - Great for someone who will convert to CNC, who would remove the X and Z Feed Motors anyway, so it is sold without these. This version has the hardened ways, which greatly extended life, especially when converted to CNC

#2 PM-940M-PDF w/HRDWYS - Same as #2, but Includes: Quill DRO (For spindle depth measurement), Z Axis (Head) Positioning Motor (used to lift and lower head for positioning, eliminates the need to raise and lower head by hand cranking) X Axis Table Feed, POWER DOWN FEED on spindle, and Cast Iron Base

#3 PM-940M-PDF w/HRDWYS&3axDRO - Same as #2 but with the 3 axis DRO Installed. So this model has all options, Power Down Feed on spindle, 3 axis DRO Installed, X Axis Power Feed, and Hardened Ways.

* Cast Iron Base is included as standard equipment with these models. It is recommended to use the machine with the cast iron base, as the base provides support and accuracy to the longer Y Axis. This model is not available without the base. You are free to use the machine without the base, but we recommend to use this model with the included base.

Main Specifications: 

• Table Size: 9-1/2"x40"
• Max. Recommended Table Load Capacity: 400 lbs (Centered)
• Table T-Slot Size and Number: 14mm / 9/16", 3 Slots
• Table Travel, X Axis: 28" Hand Only, 26" w/ Power Feed
• Cross Travel, Y Axis: 12"
• Head Vertical Travel, Z Axis: 20"
• Quill (Spindle) Travel: 5"
• Max. Distance Spindle to Table: 22"
• Table Surface Height from floor, 35" (With base flat on floor)
• Normal Working Max Height: (top of column travel motor) 82" (with base)
• Height with head all the way up: (top of main motor) 85"(with base)
• Stand (Base) Height to machine mounting surface: 24"
• Stand (Base) Dimension at floor approx. 18-1/2"W x 27"D, with 5/8" Bottom Holes for leveling pads/bolts
• Lead Screw Type: Inch Pitch Acme Threads - 10TPI on X and Y Axis
• Spindle Taper: R-8, with 7/16-20 drawbar thread (U.S. Standard)
• Quill Diameter: approx. 3"
• Head Swivel: Side To Side, 90 Degrees
• Cord Connection/Type: Cord approx. 5′ length, User to supply plug needed for your outlet (20A 240V With Ground, No Neutral Required)
• Power Required: 220 Volt, Single Phase, 10 Amp Supply
• Main Motor Horsepower: 2 H.P.
• Spindle Speeds with Two Stage-Six Speed Gear Box (RPM):  Low (90, 210, 345 ) High (670, 1180, 1970)
• Casting Type: Fine Grain Cast Iron
• Country of Origin: China
• Approximate Weight: 1350lbs with Base
• Warranty: 3 Years
• Cord Connection/Type: Cord approx. 5' length, User to supply plug needed for your outlet (20A 240V With Ground, No Neutral Required)