800MM Okuma MC-80H HMC – w/ Rigid Tapping Control, Dual Control Display, Pallet Changing Automation

Max. machine capacity: 43.31″ x 36.22″ x 31.50″ Travel: X-Axis: 43.31″ Y-Axis: 39.17″ Z-Axis: 32.50″ Spindle center to table (pallet) upper surface: -2.95″ to 36.22″ Spindle end to table (pallet) center: 9.84″ to 41.34″

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Table: Table (pallet) size: 31.50″ x 31.50″ Index positions: 360 positions (1 degree increment, direct command) Load capacity: 3,300 lbs.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Spindle: Taper hole: NT No. 50 Spindle diameter (at front bearing): 3.94″ Spindle speed range: 30 to 3,600 RPM Number of spindle speeds: Infinitely variable Feedrate: Rapid traverse (X, Y, Z Axis): 512 IPM Jog feedrates (X, Y, Z Axis): 0.01 to 157 IPM Tool magazine capacity: 50 tools Tool selection: Random (fixed address) Tool shank system: MAS BT50 Pull stud bolt type: MAS Type II Max. tool diameter: With adjacent tools: 5.51″ Without adjacent tools (face mill cutter): 9.06″ Boring tool: 11.81″ Max. tool length: 15.75″ Max. tool weight: 44 lbs. Machine height: 124.02″

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,MOTOR SPECIFICATIONS: Main motor: 20 Hydraulic power unit: 9.3 HP X-Axis drive: 4.8 HP Y-Axis drive: 4.8 HP Z-Axis drive: 6.4 HP -Table indexing: 0.5 HP

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Equipped With: • Rigid tapping control • Dual control display • Additional setup and control functions for machine ease of operation • Additional control group to run tool changer axis asynchronous to main axis group • MTConnect interface for machine data exchange with customer’s Management Information System

All specifications are assumed to be correct but must be confirmed by the purchasing entity.