Okuma Impact LU45-IIM 3000MM CNC Lathe, 2010 – 4-Axis, Steadyrest

Chuck size: 15″ Max. Swing Over Bed: 33.46″ Max. Turning Diameter: 22.83″ Max. Turning Length: 118.11″ Bar Capacity: 4.33″ Spindle Speed Range: 3000 RPM Spindle Motor: 30 HP Spindle Nose: A2-11 Number of Turrets: 2 Number of Tool Positions: 12 and 10 X-Axis Travel: 11.81″ Z-Axis Travel: 37.4″ Rapid Traverse Rate (X/Z): 787/945 IPM Machine Weight: 33,070 lbs Machine Dims (L x W x H): 205 x 90 x 94″

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Control: OSP 300L

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Options Included – Live Tooling Dual Turrets Extended Tailstock Steadyrest Airblow Auto Door

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Service Reports Available Upon Request

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Completed in December 2019

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Notes: 12.16.19 Replaced Door Inter-locks and door limit switches. 12.17.19 Replaced 3 operator windows. Replaced light glass on Operates light. And started to replace Left door air cylinder. Found an issue with one of the covers behind left side operators door making contact with the Door . We found screws missing. Cover is now secured and out of the way of door. 12.18.19 Completed installing both sides of air cylinders and manifolds on both sides. 12.19.19 Adjusted air cylinder and disassembled turret to begin rebuilding the milling drive. 12.20.19 Replaced all seals other than two due to not being able to get the collar off to replace PN: C5420-354850 and PN: C6114-400580. They are in the Machine crib by the machine. Also replaced the door open limit switches. $150,000++ worth of work

All specifications are assumed to be correct but must be confirmed by the purchasing entity.