Okuma MF46VA (2-Pallet) CNC Vertical Machining Center

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Specifications: TRAVEL X‐axis travel (ram saddle right/left) 30.00 in Y‐axis travel (table traverse F/R) 18.11 in (plus 100 mm APC travel) Z‐axis travel (spindle up/down) 18.11 in Spindle nose to table uppersurface ‐ (tapped pallet) 7.09 ‐ 25.02 in.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,PALLET Table Pallet Size: 29.92 x 18.11 in. Pallet Top surface to floor height: USA std ‐ tapped 38.19 Pallet Load Capacity: Tapped hole – USA std. (tapped) 880 lb

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,SPINDLE Spindle Speed Range: 35,000 RPM Spindle Taper: HSK-F63 Max Output : 20 HP Max Torque: 4.09 N.m

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,APC Pallet change system USA Standard 2 pallet, rotary APC Motor: OSP Servo Motor 2.7 hp Pallet Change Time 7 seconds

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,ATC & MAGAZINE INCH METRIC Tool magazine capacity: 48 ATC

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,FEED RATE INCH METRIC Rapid traverse rate: X,Y 1,575 ipm Rapid traverse rate: Z 1,259 ipm Max Cutting feedrate/X‐/Y‐/Z‐axis 1,259 ipm Jog Feed Rate 0.04 – 1,259 ipm

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,AXIS DRIVE

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,OTHER Machine Height 116 in 2,946 mm Floor Space 95 x 129 in 2,406 x 3,270 mm Machine weight (with 20 station magazine ) 21,340 lb. 9,700 k

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Equipped With (subject to buyer verification): OSP-P300MA CNC Control Pallet Changer Tool unclamp package 2-pallet rotary type APC Pallet size: 460mm x 760mm Pallet type: Inch tap High cross +200mm 48-Tool ATC Spindle/Spindle head cooling system (Oil controller) Coolant supply system ATC air blower Chip air blower, nozzle type Prep for through spindle coolant 7.0MPa (1000psi) Through air blow during spindle rotation 35,000 RPM Spindle

All specifications are assumed to be correct but must be confirmed by the purchasing entity.