Mazak Multiplex 6300 CNC Lathe, 2010 – Gantry Style, Low Hours

Maximum Swing: 16.93″ Standard Cutting Diameter: 13.0″ Maximum Cutting Diameter: 16.93″ Maximum Cutting Length Chuckwork: 8.86″ Maximum Cutting Length Shaftwork: 25.59″ MAIN SPINDLE (L&R) Distance Between Spindle Faces: Max.(Both Heads @ Home Position): 57.09″ Min: 9.82″ Spindle Nose: A2-8 Spindle Bore: 3.46″ Maximum Bar Diameter: 3.0″ Spindle Speed/Ranges: 4,000 RPM/1 Spindle Indexing (C-Axis): .001 deg./360,000 Positions Spindle Horsepower (30 min.): 30 HP (AC) Spindle Torque: 441.34 ft.-lbs.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,TURRET (L&R) Type of Turrets: Dodecagonal/Drum Non-Lift Tool Holder Shanks: Modified VDI Turret Index Time (1 Step): 0.3 Sec. Total Number of Tools: (Rotary Avail./All Positions): 24 (12×2) Tool Size: Turning & Facing: 1″ x 1″ Boring Bar Maximum Diameter: 2″

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,MILL SPINDLE (L&R) Spindle Speed: 4,000 RPM Spindle Horsepower (10 Min): 10 HP (A.C.) Spindle Torque (4000 RPM): 57.88 ft.-lbs. Maximum Drill: 7/8″ Maximum End Mill: 13/16″ Maximum Tap: 8- 5/8 UNC

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,AXIS Travel: X-Axis (L&R): 12.2″ Z-Axis (L&R): 23.82″ Rapid Traverse: X-Axis: 945 IPM Z-Axis: 945 IPM C-Axis: 400 RPM

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,MACHINE Machine Floor Space (W x L): W/O Automation or Bar Feeder, etc: 95.3″ x 167.7″ Machine Height: 82.68″ Total Power Required (Machine Only): 68 KVA NOTE: Actual Machine Main Transformer KVA Rating Will be Greater Air Requirements: 71 psi / 14 CFM Total Weight (For Machine Only): 25,740 lbs.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,GL200F GANTRY ROBOT SPECIFICATIONS:

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,ROBOT Maximum Workpiece Weight… 44 Lbs. x 2 Body Traverse Speed…….. 4728 IPM Arm Up/Down Speed………. 2364 IPM

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,CONTROLLER Type………………….. Mazatrol Fusion 640 Teaching Method………… Teaching-less, Fixed pattern Memory Capacity………… No limit on number of programs limited by hard drive space. HAND TYPE “D3” (STD) Type of Workpiece………. Round Chuck Work Construction…………… Double Hand Gripping………………. 3-Jaw Centripetal Workpiece……………… 11.81″Dia. x 5.91″L/44 lbs.x 2

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,TYPE III PITCH FEED CONVEYOR Number of Pallets………. 6 Type of Workpiece………. Chuckwork

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Mazatrol PC-Fusion 640T CNC Control

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Main Spindle Motor 30 HP L&R Spindle Speed 4000 RPM L&R C-Axis 0.001 Degree Incr. L&R 12 Position Drum Turret (VDI Strt. Shank) Rotary-Tool Spindle Speed 4000 RPM L&R / 57.88 ft-lbs Automatic Tool eye L&R Milling Spindle Synchronous Tapping L&R Relocation Device

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Chuck Air Blast L&R

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Chip Conveyor Rear Disposal (Hinge Type)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,GL200F/Pitch-Feed Type 3/D2-Hand

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,12in chucks on both spindles

All specifications are assumed to be correct but must be confirmed by the purchasing entity.