Hexagon Metrology Optiv M 3.2.2 Multisensor CMM, 2021 – Less than 50 Hours

Measuring Range: X Axis: 12″ Y Axis: 16″ Z Axis: 8″

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Touch Probe Sensor Offset X Axis: 2.4″ CWS Sensor Offset X Axis: 3.3″ LTS Sensor Offset X Axis: 3.8″ LTS Sensor Offset Y Axis: 0.7″

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Travel Speed X/Y/Z (mm/s): 300/300/300 Vector (mm/s): 500 Measurement software: PC-DMIS Relative Humidity Requirement: 40-70%, Non-Condensing Temperature Requirement: 20°C ± 2 °C Input Voltage: 1/N/PE 115 – 230V ~ ± 10 % Frequency: 50/60 Hz ± 5% Consumption: 600 VA

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Equipped With: • Vision sensor (camera sensor) • Touch-trigger probe • Scanning probe • Laser triangulation sensor (LTS) • Chromatic white light sensor (CWS) Safety equipment: • Emergency-Stop circuit with Emergency-Stop buttons • Scale signal monitoring • Force limitation on all axes • Resettable fuses on all axes • Protective covers for the axes’ drives • Collision protection for touch-trigger probes

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Includes: – Heavy Duty Hexagon Table – Stylus Kit

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,*Detailed Spec Sheet Available

All specifications are assumed to be correct but must be confirmed by the purchasing entity.