Gleason No. 116 Hypoid Production Rougher, 1970s

Cone Distance, Max. (30 Degree Angle and 12″ Cutter): 9″ Pitch Angle-Max., Shafts at 90 Degrees: 84 Degrees/18′ Pitch Angle-Min., Shafts at 90 Degrees: 5 Degrees/ 42′ Diametral Pitch (coarsest): 2* Max. Depth: 1″ Extreme Ratio, Shafts at 90 Degrees: 10 to 1 Largest Pitch Diameter, 30 Degree Spiral Angle; 10 to 1 Ratio, Gear: 18″ 2 to 1 Ratio, Gear: 16″ 1 to 1 Ratio, Gear: 12 3/4″ Number of Teeth: 5-175 Max Ratio for Pinions to Operate with Formate Gears: 2 to 1 Widest Face** *Requires Special Depth Cutter Blades ** Using a 12″ Dia. 20 Blade Cutter and 35 Degree Spiral Angle the Face Width Should Not Exceed 1 3/8″ on Gears to Prevent Two Blades in The Cut. However Any Reasonable Face Width Can Be Accommodated.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Work Spindle Diameter of Taper Hole at Large End: 3 29/32″ Taper per Foot: 39/64″ Depth of Taper: 6″ Diameter of Hole Through Spindle: 3 1/16″ Diameter of Spindle Nose: 5 1/2″

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Cutter Diameters: 6″-7.5″- 9″- 12″

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Work Head Settings Max. Offset Above Center: 4 1/2″ Max. Offset Below Center: 4 1/2″ Max. Distance from Machine Center to Nose of Spindle: 13 1/2″ Cutter Speeds: 20-115 Rpm Feed (sec./ Tooth): 9 to 80 Seconds

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Feed Motor: 5 Hp/1800 Rpm Hydraulic Motor: 3/4 Hp/ 1800 Rpm Coolant Motor: 1/2 Hp/ 3600 Rpm

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Dimensions: 75″x 114″x 77″ Weight: 23,400 Lbs

All specifications are assumed to be correct but must be confirmed by the purchasing entity.