Baker Perkins Mechanical Fred Depositor – Commercial Candy Maker, 2019 – Low Hours

This Field Research Experimental Depositor (FRED) is designed to form confectionery pieces from a cooked syrup for research, product development and small batch purposes.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,The FRED is constructed in a mild steel framework and is supported by castors so that it can be easily maneuvered.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,The pumps operate submerged in the hopper of cooked syrup and during the deposit cycle a volumetric amount of product is deposited into a mould cavity.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Capacities: Gummies or Hard Candy Piece Weight: 6.0 Typical Mould: 30 Pieces Depositing Speed: Varied Output: 30 Pieces Per Min Moulds Per Min: 1 Estimated Cooling Time: Product Dependent

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Voltage: 480 V ± 10% Frequency: 60 Hz ± 2% Phases: 3 Neutral: Yes Earthing (Grounding): Yes Control Voltage: 24 VDC Maximum Ambient Temperature: 40 °C (104 °F) Minimum Ambient Temperature: 5 °C (41 °F) Maximum Altitude: 1000 m (3280 ft) Maximum Relative Humidity: 50% at 40 °C (104 °F) 90% at 20 °C (68 °F)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Maximum short circuit current interrupting capacity: 10 kA Panel Cooling: Fan/Filter

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Power Requirements: Main Drive Motor: 0.25 kW Hopper Heated Jackets: 0.8 kW Hopper Base Heaters: 1.4 kW Manifold Heaters: 0.3 kW

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Equipped With: – Twin Stainless Steel Hoppers with Separate Electrically Heated Jackets – One Set Of Stainless Steel Pump Parts to Produce a Range of Piece Weights from 1.0 Grams up to 5.5 Grams (and Centre Weights From 10% up to 20% of Total Piece Weight). – One Pair of Insulation Cases – Integral Control Panel with Push Button Controls.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.,Weight: 1,050 lbs.

All specifications are assumed to be correct but must be confirmed by the purchasing entity.