NEW Minster GS2-400-305x140-STD Straightside Two Point Servo Drive Press

SPECIFICATIONS

Press Specifications

Model Number........................................................ GS2-400-305x140-STD

Force × Distance off Bottom.................................. 4000 kN x 6 mm (440 tons x 0.24 in.)

Energy..................................................................... 120 kJ (531 in-tons) @ 40 spm

Connection Points................................................... 2

Lube Unit Location................................................. Standalone Floor Level

Approximate Press Weight..................................... 82,000 kg (181,000 lbs.)

Scale and Display Units.......................................... Inch/Metric

Shop Air Pressure, Minimum.................................. 5.9 bar (590 kPa) (85 psi)

Press Slide Specifications

Stroke Length.......................................................... 350 mm (13.8 in.)

Max. Speed - Continuous (reduced rating)............. 53 spm

Max. Speed in pendulum 150 mm *....................... 90 spm

Max. Speed in pendulum 125 mm *....................... 95 spm

Max. Speed in pendulum 100 mm *....................... 105 spm

Max. Speed in pendulum 80 mm *......................... 110 spm

      * Rate depends on stroke profile and press mechanical properties

Area of Slide, R-L × F-B........................................ 3050 x 1400 mm (120 x 55 in.)

Slide Face Machining.............................................. Standard

Overload travel........................................................ 25 mm (0.98 in.)

Overload recovery time........................................... 120s

Maximum Upper Die Weight................................. 6,000 Kg (13,200 lbs.)

Press Bolster Specifications

Bolster Plate Material.............................................. Steel

Bolster Plate Thickness........................................... 190 mm (7.5 in.)

Area of Bolster, R-L × F-B..................................... 3050 x 1400 mm (120 x 55 in.)

Opening in Bolster, R-L × F-B............................... None

Bolster Plate Machining.......................................... Standard

Press Frame Specifications

Upright Passline Opening, F-B............................... 1400 mm (55 in.)

Area of Bed, R-L × F-B.......................................... 3050 x 1400 mm (120 x 55 in.)

Opening in Bed, R-L (F-B ribs) × F-B................... 2500 (3) x 350 mm (98.4 x 13.7 in.)   

Bed/Slide Deflection at 67% of Die Area............... 0.125 mm/m (0.0015 in/ft)

Shutheight, Maximum (SDAU).............................. 750 mm (29.5 in.) Bolster to Slide

Shutheight Adjustment........................................... 350 mm (13.8 in.)

Accuracy of slide adjustment.................................. 0.1 mm