https://youtu.be/c7R-5wdt278?si=L-7U5PJQTAONcQ1u 

DPM RX5 Bed Mill Specifications with the ProtoTRAK RMX Control
Machine Specifications 
Table Size – 50” x 12” 
T-Slots (number x width x pitch) - 3 x .63" x 2.52" 
Travel (X, Y, Z axis) – 40” x 20” x 25.81" 
Quill Diameter - 3 15/16"  Maximum Quill Travel - 5”
Spindle Taper – 40 Taper
Spindle Speed Range - 40-600, 300-5000 
Spindle Center to Column Face – 20.5” 
Spindle Motor Power – 5 HP
Power requirements - 200-240V; 3P; 35A 
Maximum Weight of Workpiece - 1760 lbs. 
Height of table from bottom of bed - 40” 
Max spindle nose to table – 25.81” 
Min height – 87.5”
Max height - 102”
Width of machine including table – 94.13” 
Length with electric box door closed – 82.5” 
Overall width incl full table traverse – 131.06” 
Overall length with electrical door open – 103”
Footprint of Machine - 24” x 48.4”
Weight net / shipping lbs. - 4400 / 4700 
Rapid traverse X, Y, Z - 400 IPM on X and Y, 250 IPM on Z
Drilling max capacity - 1” 
Milling max capacity - 5 inch³/min
Tapping max capacity – 1”–8 
Auto Lube Pump
Precision ground ballscrews in the table, saddle and ram
Chrome hardened and ground quill
Meehanite castings 
Slide ways are Turcite coated 
Wide way surfaces are hardened and ground

Equipped With:
Prototrak RMX CNC Control 
Advanced Features 
Chip Tray and Splash Guard
Traking/Electronic Handwheels
Worklamp Kit
Limit Switch Option 
Power draw Bar
Remote Stop/Go 
Fog Buster Spray coolant System