PRECISION MATTHEWS PM-1340GT HIGHLIGHTS:
- Extremely High Quality Lathe, meant for very high precision work, and suitable for every day use. Perfect for the professional user who is looking for the best available
- 100% Made in Taiwan, no shortcuts taken, built to a very high level of quality
- Excellent machine for Gunsmithing use, Very Short Spindle, Ultra High Precision
- Available in either Single or 3 Phase power, to match the user’s needs
- High Precision, Hardened and Ground gears throughout headstock, which leads to extremely smooth and quiet running for a geared head lathe, and much longer life (Suitable for daily, professional use)
- Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch (.100” Per Turn)
- Backed by an industry leading 5 year warranty
STANDARD/INCLUDED ACCESSORIES:
- Back Splash Guard
- L.E.D. Work Light
- High Precision NSK Spindle Bearings, +/‐ .0001” Spindle Runout Max
- 4 Way Tool Post
- Threading Dial (4” Travel Dial, 32 Tooth)
- Reducing Sleeve for headstock
- Dead Center for Headstock
- Steady Rest
- Dead Center for Tailstock
- Follow Rest
- Feed Rod Clutch
- Chip Tray
- Misc. Tools for operation
- D1‐4 Camlock Quick Change Spindle
- Belt Cover Interlock Switch
- D1-4 Face Plate (10″)
- 5 Year Warranty
PM-1340GT MAIN FEATURES:
- Highest Quality Lathe, Made in TAIWAN
- Large 1-9/16” Spindle Bore clear through spindle for through-headstock work
- Short Spindle Length, only 13-3/4″, perfect for gunsmithing work
- Extra thick spindle wall for extra rigidity, almost double when compared with most other machines in this size
- Power feed on Carriage, and Cross Slide, both left and right, and in and out, for both turning and facing operations with automatic feed. Allows for the best surface finish in all directions.
- Induction Hardened and Precision Ground Bed Ways to resist wear and give a long service life
- All shafts in headstock hardened and ground along with gears which are precision ground, set in with a close tolerance fit, which leads to longer life and quiet running when compared with other geared head lathes
- Inch AND Metric thread cutting ability is a standard feature, NO CHANGE GEARS for any inch thread or feed rate, only change gears required are for Metric threads
- 4” Travel Thread Dial, 32 tooth gear on thread dial, 8 TPI Main Leadscrew for easier threading using the half nut / thread dial
- Large diameter, extra thick wall tail stock quill for more rigid and accurate tail stock operations,
- Locking Tang in tail stock is provided
- Removable Gap for larger diameter work when needed
- High quality electronics used throughout machine, very reliable contactors, motors, etc.
- Slip Clutch is standard on feed rod, to help prevent overloading damage of feeds and allow the use of a solid carriage stop for repetitive work'
- Precision Tapered Roller Bearings used in spindle, for the ultimate in long life, high precision, and best surface finishes. Guaranteed Run Out +/- .0001″ for ultimate precision
- True INCH PITCH main lead screw, cross feed, and compound lead screws make it easy to use for the INCH measurement System, yet still has the Metric readings on dials for the ultimate in versatility for any job that may come about
- Splash oil bath lubrication in Headstock, and Apron, for efficient lubrication, and long life, yet simple and reliable, and does not require any filter changes or pump maintenance as with oil pump lubrication systems. Also no risk of losing oil flow to expensive parts as there can be with pump lubricated systems
- Only Extremely High Precision Spindle Bearings are used, NACHI (Japan)
- Longest in class, 5 Year Warranty
PM-1340GT MAIN SPECIFICATIONS:
- Type: Geared Head
- Model: PM-1340GT
- Max. Swing over bed: 13″
- Max. Swing over cross slide: 6-1/2″
- Max. Swing in gap: 19-1/8″
- Center Height: 6.5″
- Spindle Center Line Distance from Floor: Approx. 46”
- Max. Distance Between Centers: 40″
- Width of Bed: 7-1/2”
- Bed Height: 11.5”
- Spindle Bore: 1-9/16”
- Spindle Taper: Internal: MT #5
- Spindle Mounting System: Cam Lock, D1-4
- Spindle Speeds: 90-1600 RPM, 12 Steps
- Bed Length: 63-3/4″
- Lead Screw Diameter / Pitch: 7/8” / 8 TPI
- Feed Rod Diameter: 3/4”
- Inch Thread Cutting Range: 4-112 TPI, 40 Different Threads
- Metric Thread Cutting Range: .25-7.5mm Pitch, 24 Different Threads
- Longitudinal Feed Range (Left and Right): .002-.02 Inches Per Revolution
- Cross Feed Range (In and Out): .001-.01 Inches Per Revolution
- Spindle Length through headstock, Protruding End to D1-4 Chuck Mounting face: 13-3/4”
- Spindle Length through headstock, Protruding End to 3 Jaw Chuck face: 17-1/4”
- Cross Slide Travel: 6-3/4”
- Compound Travel: 3-1/2”
- Tail Stock Quill Diameter / Travel / Taper: 1-9/16” / 4” / MT#3
- Main Motor: Horsepower: 2 HP
- Power Requirements: 208 to 240 Vac, 60 Hz, 1 or 3 phase (Choose phase option when purchasing, both recommend a 20A Circuit)
- Power connection: Direct wire in to cabinet on the rear side of the headstock
- Machine Dimensions, Assembled with stand: 52”H x 29”W x 70”L
- Machine Weight, without stand: 1100 LBS
- Machine Weight, With Steel Stand: 1350 LBS
|
