Accutek Packaging Equipment Model: S.A. CHK Capper / Torquer

Accutek Packaging Equipment

Model: S.A. CHK Capper / Torquer

Manufacturer:

Accutek Packaging Equipment Companies

Model:

Semi-Automatic Chuck Capper/Torquer  // S.A. CHK Capper

Serial No.:

A-17 203735

Chuck Size:

20 (Accutek Model)

Manufactured Date:

March, 2003

Electrical Specs:

110Volts / N/Aamps / 60HZ 

Air Requirments:

70psi min

Overall Dimensions:

24”W x 20”D x 63”H

Weight:

80lbs (approx)

NOTED ISSUES:

One of the air cylinders does leak some air. Some of the air lines will need to be replaced as some are becoming brittle and stiff. The attachments on the lower right leg, attach to a conveyor when the unit is all set-up; to automatically advance to the next bottle on the conveyor.

Someone will need to have some knowledge to set-up the capper. It is not a plug and play unit. This unit could be set up to run manually possibly.

Seller Note:

Unit is USED. Some minor scratching/blemishes/ rust spots along with signs of other wear on paint can be seen on the surfaces of the unit. The unit was removed a working environment and was functioning as intended when removed from service. The unit has been test as seen in the video. Unit is being sold ***AS-IS, WHERE-IS, AS-SHOWN.*** *** PLEASE DO NOT ASSUME THERE IS MORE TO IT. IF YOU ARE UNCERTAIN PLEASE BE SURE TO ASK PRIOR TO PURCHASING***. Pictures and video are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.