https://youtu.be/ZX_kTi6waeE 

Machine Specifications
• Height of Centers-8”
• Distance between centers-30”
• Swing over bed -16”
• Swing over saddle wings-16”
• Swing over cross slide-8.6”
• Cross slide travel-8.5”
• Tool section max-3 /4”
• Coolant tank capacity - 8 gal.
• Width of Bed-12.6”
• Height of Bed-12.6”
• Spindle Nose (Camlock)-D1-6
• Spindle through hole-2.12”
• Spindle taper-MT#6
• Taper in reduction sleeve -N/A
• Spindle dia at front bearing-3.15”
• Number of bearings-2
• Bearing class (radial round)-P5
• Spindle speed range (RPM)-150-2500
• Optional Tailstock Quill travel-5”
- Quill diameter-2.36”
- Quill taper hole-MT#4
• Spindle Motor HP -7.5
• Power requirements, control-110V; 1P; 8 A
• Power requirements, machine-220V;3P;60Hz
• Amps full load current-25
• Dimensions net - 79 x 40 x 56”
• Dimensions shipping - 87 x 45 x 67”
• Weight net – 2,875 lbs.
• Weight shipping – 3,420 lbs.
• Maximum rapid feed X - 100
• Maximum rapid feed Z - 150
• Coolant pump motor -1/8 HP
• Spindle motor brake - Dynamic braking
• Way surface hardness - 400 – 450 HB
• Head stock lubrication - Oil bath
• Sliding door for easy set-ups
• Bedways hardened and ground
• Sliding surfaces Turcite coated
• Dovetails on cross slide, V-ways on saddle
• Adjustable saddle gibs

Machine Options
Prototrak SLX CNC Control 
Advanced Features with Verify
Networking 
Traking