Revolutionize Your Business with Machine Hub Software! Learn More
3" BLM E-Bender 76 CNC Multi-Axis-Servo Driven Tube Bender, 13 Axes, 3" Tube Dia., 157" Tube Length, Max. Radius 7.87", PC Based CNC Ctrl., New 2004
Brand
Category
Model
E-Bender 76
Stock #
56039
Year
2004
Condition
Very Good
Location
Minnesota
| Note on Machine - See Below in Features | FEED SPECIFICATIONS: per discussion in Features Section |
| CNC Control | yes |
| Type of CNC Control | BLM VGP 3D PC Based Control |
| Number of Axes | 13 |
| Alpha Numeric Name of Axes | X1, Y1, Z1, 01, Y2, V1, V2, W3, W4, V4, U4, U2, U1 |
| Type of Steel | Mild Steel |
| Max. Bending Diameter | 76mm or 2.99 Inches |
| Max. radius of curvature (monitoring) | 200mm or 7.87 inches |
| Minimum internal radius (reducible on request) | 50mm or 1.968 inchs |
| Maximum tube clamping gap (through) | 76mm or 2.99 inches |
| Tube Sizes: | 3.0 Inches |
| Max. Wall thickness @ | .125 Inches |
| Tube Size: | 2.0 Inches |
| Max. Wall thickness @ | .188 Inches |
| Circle Radius Limitation | Any thing that will fit in a 3.0" circle. Max. Wall thickness, the thickness will depend on shape. |
| Tube Lengths - Max. to Min. | 2m or 78.74" and 4m or 157.48" (Note: If pushing is not required the length would be 156" Length from the first bend to machine limit. |
| Option | Hitch Feed |
| Tube Length - Additional Information | If bending a CLR smaller than 2D and pushing with the collet is needed, the length would be 78.7" from the first bend to machine limit. |
| Tube Length - Additional Information - 2 | If pushing is not required the length would be 156" Length from first bend to machine limit. |
| Machine Radius Sizes: | Max. 9.84" Inside Radius (ISR) |
| Machine Radius Sizes: No available | Variable Radius Bending - Not Available on this machine. |
| Power On Hours | 15825 at 40 hours per week |
| Machine Weight | 28,600 Lbs. |
|
Features
Multistack up to 3 pieces CNC PC Based Control LCD Color Screen Function Keyboard with E-Stop Alpha/Numeric Keyboard Pedestal Control with Foot Pedal and E-Stop Manuals Lubrication System Electrics: 480V/3/60 AMP: 50 Misc. Tooling; approximate: 34 Round, Rectangle, Square Collets, and some other tooling. FEED SPECIFICATIONS: per discussion with a knowledgable experienced BLM/Tubebending personell : to Mandrell Feed you are LIMITED TO the 156". But there is NO Limit on HITCH FEEDING - you can feed a 6' to 7" feet per stroke until you run out of material. The is also FREE BENDING without the Mandrell. The only issue is radius that are to tight will collapse the tube wall. If you wanted to bend a 20' or 240" 3" tube it will all depend on the clearances as the part moves forward. Many times manufacturers my place the tubebender on large I-Beams to increase the work envelop, by raising the tubebender up. *Enclosure - has been removed for purposes of moving and transportation - all panels are with and stored. |
|
Watch https://www.youtube.com/watch?v=VSdsxoZIgOk
