Revolutionize Your Business with Machine Hub Software! Learn More
Coil Weight | 50000 pounds |
Width | 62 inches |
Thickness | .312 inches |
Max OD | 72 inches |
General Specifications:
• Year Manufactured: 1986 (Upgraded with New AC to DC Drives)
• Material: Hot Rolled, Cold Rolled, Galvanized, Stainless
• Maximum Coil Weight: 60,000#
• Incoming Strip Width: 62"
• Outgoing Strip Width: 60"
• Minimum Strip Thickness: .010"
• Maximum Strip Thickness: .375"
• Incoming Coil ID: 19" to 20”, Up to 26" with Filler Pads (Nominal 20” ID)
• Outgoing Coil ID: 20" to 24", Up to 30” with Filler Pads (Nominal 20” ID)
• Maximum Coil OD: 76"
• Number of Cuts: 16 Cuts of .250” Mild Steel, 7 Cuts of .375”, 21 Cuts of .020” (Could do 20 Cuts of .250” with 55” OD Coils at Recoiler)
• Maximum Slitting Tension: 37,500#
• Maximum Line Speed: Heavy-Duty Two-Speed Gear Reducer 100 & 300 FPM with Coil Build Up to 1,000 FPM
• Electrical: Variable Speed, 250 kW at Peak Load, 460/3/60 Cycle or 380/3/50 Cycle Input
• Line Direction: Right to Left
Consisting of the Following:
Three Arm Turnstile, 60" Arms
Coil Car
44" Wide Deck, 18” Vertical Lift
Self-Contained Hydraulics
Platform Top "V" Saddle
Coil Car Traverse 15' by Hydraulic Orbit Motor Chain & Sprocket
64" Wide Uncoiler with Heavy Duty Twin Hold Down Rolls
19” to 20” ID Coils with Filler Pads for Up to 26” ID (Nominal 20” ID)
Sliding Base ± 6” from Centerline, Air Clutch
AC Motor Feed and Recoiling
Water Cooled Air Brake
Peeler System, In/Out, Up/Down
Powered Pinch Roll System, 66” Face
Hydraulic Shear for Cropping Heads & Tails of Coils
64" Wide x 10” Diameter Precision Arbor Slitter with Feed Up Drive, (2) Heads
Dog Clutch for Quick Head Removal
Shimless Tooling (See Details Below)
(2)-18” Wide x 42” OD Capacity Scrap Winders with Level Wind
Hydraulic Self Dump with Oscillating Eye
Hydraulically Actuated Threading Table
Optional - Corrective Leveler for Light Gauges (No Looping Pit Required)
Tension Stand with Separator Shaft & Tooling
72" Wide Recoiler with Separator Shaft and Full Complement of Tooling
Two-Speed Gearbox
Hydraulic Gripper Slot
Heavy Duty Drum for 20” to 24” ID Coils with Filler Pads for Up to 30” ID (Nominal 20” ID)
150 HP DC 650/1950 RPM, 500V Reliance Motor (Modern)
Exit Coil Car, 63" Wide Bed
Holding Finger Design for Narrow Slit Coils
(Optional) 60,000# Capacity Two-Arm Turnstile - $39,500
Wide Slots for C-Hook Coil Removal or Hydraulic Pushoff to Banding Line
Full Complement of Shimless Tooling Included for Any Slit Width (Cost New $200,000)
1. Knives
a. 36 pcs @ .750” tk x 15.50” OD
b. 33 pcs @ .750” tk x 16.00” OD
c. 42 pcs @ .500” tk x 15.75” OD
2. Spacers
a. 85 pcs @ 2.000” wide x 12” OD
b. 55 pcs @ 1.000” wide x 12” OD
c. 36 pcs @ 0.500” wide x 12” OD
d. 34 pcs @ 0.300” wide x 12” OD
e. 25 pcs @ 0.200” wide x 12” OD
f. 45 pcs @ 0.164” wide x 12” OD
g. 30 pcs @ 0.155” wide x 12” OD
h. 44 pcs @ 0.132” wide x 12” OD
i. 36 pcs @ 0.125” wide x 12” OD
j. 52 pcs @ 0.116” wide x 12” OD
k. 40 pcs @ 0.108” wide x 12” OD
l. 50 pcs @ 0.104” wide x 12” OD
m. 50 pcs @ 0.102” wide x 12” OD
n. 40 pcs @ 0.101” wide x 12” OD
o. 40 pcs @ 0.100” wide x 12” OD
p. 18 pcs @ 0.060” wide x 12” OD
q. 20 pcs @ 0.030” wide x 12” OD
r. Various shims from .030” to .005” thick
3. Overarm Tooling
a. Full Complement
4. Various Sized Rubber Stripper Rings
HYDRAULICS: Hydraulic pump and tank unit, 40 HP @ 1,000 PSI
ELECTRICAL: AC to DC with PLC controls and new AC to DC transformer |
Your Privacy Is Important To Us
Cookies are very small text files that are stored on your computer when you visit a website. We use cookies for a variety of purposes and to enhance your online experience on our website (for example, to remember your account login details).
You can change your preferences and decline certain types of cookies to be stored on your computer while browsing our website. You can also remove any cookies already stored on your computer, but keep in mind that deleting cookies may prevent you from using parts of our website.
Choose which cookies you want to enable or disable: