Southwestern Industries Trak FHMSX- 7 (2011)

SPECIFICATIONS:
 Table size................................... 76" x 14"
T-slots (number x width x pitch)............. 4 x 16mm x 63.5mm
Travel (X, Y, Z axis)........................ 60" x 23" x 20.5"
Quill diameter............................... 5.06"
Spindle taper................................ NMTB 40
Spindle speed range RPM...................... 200-5000
Spindle center to column face................ 23"
Spindle motor power.......................... 7.5 HP
Power requirement, control................... 110V, 1P, 15A
Power requirement, machine................... 220V, 3P, 60HZ Current,
Full Load Amps...................... 37.5 FLA
Maximum weight of workpiece.................. 2200 lbs.
Height of table from bottom of bed........... 38.25"
Maximum spindle nose to table................ 21.5"
Minimum height............................... 95.5"
Maximum height............................... 101"
Width of machine including table............. 110.5"
Length with electric box door closed......... 93.75"
Overall width including full table travel.... 171.65"
Overall length with electrical door open..... 119.5"
Footprint.................................... 37" x 62.2"
Way surface.................................. dovetail X axis;
Way surface.................................. square ways Y and Z axis
Weight (approximate) net..................... 7650 lbs. Weight (approximate)
shipping................ 7975 lbs.
Drilling max capacity........................ 1" dia.
Tapping max capacity......................... 5/8"
Milling max capacity......................... 7 inch3/min
Way surfaces hardened and ground Turcite coating on all slide ways
Automatic lubrication pump
Auxiliary function hardware Limit switches
TRAKing/Electric Handwheels

Equipped With:
Prototrak SMX CNC Control
Power Draw Bar