Working AreaCenter height | 5 in | Workpiece length (max.) | 22 in | Grinding length | 20 in | Work piece weight (max.) | 110 lbs | Grinding diameter | 7.9 in | Inside grinding diameter | 0.8 - 3.9 in | Inside grinding depth | 4.9 in | Table swivel range (max.) | 3¡ / 9¡ R / L | TravelsTravel X-axis | 6.3 in | FeedTable feed, infinitely variable | 0.33 - 13.08 fpm | HeadstockWorking spindle speed, infinitely variable | 40 - 460 rpm | Work piece headstock swivel range r/l | 360¡ / 45¡ pitch | Working spindle taper | MT 4 | Grinding headstockGrinding spindle speed | 1,670 rpm | Inside grinding spindle speed | 15,000 rpm | Grinding headstock swivel range (r+l) | 30¡ / 180¡ | TailstockTailstock taper | MT 4 | Drive CapacityMotor rating working spindle | 1 Hp | Motor rating outside grinding | 5.4 Hp | Motor rating X axis feed | 1.7 Hp | Motor rating Z axis feed | 1.7 Hp | Measures and WeightsGrinding wheels dimensions | 16x2x8 in | Overall dimensions (length x width x height) | 115x89x69 in | Weight | 7,700 lbs |
- Superior machining quality and high flexibility for small batch productions
- These proven, solid machine frames with wide V-guides and boxways ensure low vibrations for optimum work results
- Servo-driven axes run on precision preloaded ball screws
- Electronic hand-wheels for grinding headstock movement
- High-precision hydrodynamic bearings of the grinding spindle ensure optimum grinding results
- Fagor control, optimized for grinding cycles
Innovative, intuitive and customized - Featuring standard cycles plus KNUTH-specific cycle user interface that can be customized to match the existing machine configuration - for maximual utilization and optimized processes
- The workpiece can be programmed via cycles or G-codes (DIN ISO) or a combination of both systems
- grinding wheel can be dressed prior or during the entire machining process (incl. compensation)
- automatic grinding wheel dressing cycle can be selected before finishing operation (incl. compensation)
- manual swing grinding mode, like on a conventional machine, but with electronic hand-wheels
- USB port at front of control, configuration with RS 232 & Ethernet (optional) data ports is possible (incl. date transfer software)
- cycle Examples: Plunge-cut grinding, plunge-cut grinding with oscillation, and cylindrical grinding
- control Fagor 8055i FL-TCO
- internal grinding equipment
- 3-jaw chuck
- grinding wheel balancing station
- center point
- fully enclosed housing
- coolant system
- automatic central lubrication
- leveling feet
- grinding wheel flange
- work lamp
- operating manual and programming instructions
|
No files or videos to display