Haas T5C-3 Tilting 5-Axis Rotary Table with: Haas 2-Axis Control and Air Collet Closers.

Tilt A-Axis Spindle:
Torque (ft-lb): 210
Runout Max.: 0.0005" 
Speeds (°/sec): 0.001 to 60
Tooling: 6 std T-slots @ 60°
Center Height: 6.000" ± 0.001" 
Brake Torque (ft-lb) @ 100 psi: 200
Indexing: 
Worm Gear Diameter: 6.30" 
Motor: Type: 1.5 HP DC Servo
Gear Ratio (worm & gear): 90:1 
Timing Belt: 2:1
Operating Specifications:
Duty Cycle Full/Low Speed: 50% / 100%
Operating Temp.: 100° F (max. ambient)
Power Required (VAC): 115 ± 5% @ 3 amps
Max. Air Pressure: 120 psi
Table Weight: 165 lbs. / Control Weight: 17 lbs.
Rotary B-Axis Spindle: 
Torque (ft-lb): 45 HA5C
Speeds (°/sec): 0.001 to 200
Collets: std 5C
Nose Thread: 2 3/16" - 10" 
Spindle Center: 6.000" 
Indexing:  
Worm Gear Dia.: 2.8"
Motor Type: .5 hp DC Servo
Drive Type: worm and gear
Ratio: 60:1
Operating Specifications:
Duty Cycle: 75% @ full speed
Operating Temp.: 100° F (max. ambient)
Power Required: 100° F (max. ambient)
Max Air Pressure: 120 psi
Weight: Rotary Heads: 168 lbs (3 heads)

Equipped With: Haas 2-Axis Control, Air Collet Closers