MACHINE# 13317

SPECIFICATIONS:

MANUFACTURER: LOEWY HYDROPRESS (U.S.A.)
TYPE: OIL HYDRAULIC ALUMINUM EXTRUSION PRESS WITH ALL DOWNSTREAM EQUIPMENT

YEAR REFURBISHED:
2008 - ALL NEW DOWNSTREAM EQUIPMENT INCLUDING PULLER, HOT SAW, RUNOUT,

COOLING BED, STRETCHER, AND FINAL CUTTING SAW.
2014 - BACK SIDE TABLE OVERHAUL.
2016 - MAIN PUMP OVERHAUL.

THE LINE CONSISTS OF:

 1. LOEWY HORIZONTAL EXTRUSION PRESS
    Hydraulic Cylinder:
    Main Ram:                 1219mm Dia. x 1,675 stroke (st) (51" x 66")
    Side Cylinder:            310mm x 203mm x 1,675 stroke (st) (12" x 66")
    Container Cylinder:       280mm x 140mm x 450 stroke (st)
    Shear Cylinder:           228mm x 165mm x 1,000 stroke (st)
    Die-Slider Cylinder:      140mm x 80mm x 1,900 stroke (st)

    Hydraulic Cylinder Power:
    Main Ram
    - Area:                   11,670cm2
    - Pressure:               240 kgf/cm2
    - Power:                  2,800 ton

    Side Cylinder
    - Bore:                   754.5 x 2=1,509cm2
    - Rod:                    323.5 x 2=647cm2
    Advance Area:             1,509cm2

    - Pressure:               240 kgf/cm2
    - Power:                  362 ton
    Return Area:              862cm2
    - Pressure:               240 kgf/cm2
    - Power:                  207 ton

    Container Cylinder
    - Bore:                   615.5 x 2=1,231cm2
    - Rod:                    154cm2 x 2=308cm2
    Open Area:                1,231cm2
    - Pressure:               240 kgf/cm2
    - Power:                  295 ton
    Close Area:               923cm2
    - Pressure:               240 kgf/cm2
    - Power:                  221 ton
    Sealing Area:             923cm2
    - Pressure:               210 kgf/cm2
    - Power:                  193 ton

    Shear Cylinder
    Bore:                     408cm2
    Rod:                      214cm2
    Down Area:                408cm2
    - Pressure:               240 kgf/cm2
    - Power:                  98 ton
    Lifting Area:             194cm2
    - Pressure:               240 kgf/cm2
    - Power:                  46 ton

    Billet Size:              228mm x 750mm (9" x 29.5")

    Die - Stack:              460mm x 460mm (18" x 18")

    Oil Tank Size:            12,000 Liters (3,170 gal.)

    Motors:
     250 Hp:                  1 set
     200 Hp:                  3 set
     150 Hp:                  1 set
     75 Hp:                   1 set
     20 Hp:                   1 set
     7.5 Hp:                  1 set

    Container Heaters:
     60 kw:                   1 set

    Machine Size:
     W 8250mm x H 5150mm x L 11,500mm (27 Ft. x 16.8 Ft. x 37.5 Ft.)

 2. BILLET INDUCTION HEATER
    Type:                     INDUCTION
    Size:                     228mm x 1500mm (9" x 59")
    Transformer section:      3 zone
    Main voltage:             4160V

 3. PULLER
    Main voltage:             440V 60Hz
    Type:                     Double puller
    P1 motor:                 19kw DC, 25HP
    P2 motor:                 19kw DC, 25HP

 4. WATER QUENCHING DEVICE
    TYPE:                     DEEP QUENCHING & SPRAY QUENCHING
    SIZE:                     700mm x 3000mm (27" x 118")
    ROLLER PITCH:             550mm
    ROLLER SIZE:              110mm x 420mm

 5. MOVABLE HOT SAW
    SAW BLADE:                750mm x 110 - 120 tooth (29.5" Diameter)
    SAW CUTTING SIZE:         250mm
    SAW DRIVE MOTOR:          5.5kw 7.5HP

 6. RUN-OUT TABLE
    TYPE:                     FREE ROLLER
    TABLE SIZE:               600mm x 915mm x 15,000mm (23.5"x 36"x 49 Ft.)
    ROLLER PITCH:             500mm
    ROLLER SIZE:              110mm x 450mm

 7. TRANSFER CONVEYOR
    TYPE:                     CONVEYOR BELT
    TABLE SIZE:               1425mm x 895mm x 37,200mm
    BELT PITCH:               1200mm
    BELT SIZE:                100mm x 10T

 8. COOLING TABLE
    TYPE:                     CONVEYOR BELT
    TABLE SIZE:               2955mm x 855mm x 38,400mm (116"x 33"x 125 Ft.)


    BELT PITCH:               1,200mm
    BELT SIZE:                100 x 10T

 9. STRETCHER
    TYPE:                     VERTICAL TYPE
    JAW DIMENSION:            300mm (11.8")

10. STORAGE TABLE
    TYPE:                     CONVEYOR BELT
    TABLE SIZE:               2010mm x 865mm x 38,400mm
    BELT PITCH:               1200mm
    BELT SIZE:                100mm x 10T

11. SAW CHARGE TABLE
    TYPE:                     CHAIN DRIVE TYPE
    TABLE SIZE:               900mm x 885mm x 39,600mm
    ROLLER PITCH:             600mm
    ROLLER SIZE:              110mm x 10T x 790mm

12. FINAL CUTTING SAW
    SAW BLADE:                650mm x 80 - 100 tooth
    SAW CUTTING SIZE:         650mm (25.6")
    SAW DRIVE MOTOR:          5.5kw 7.5HP

13. INSPECTION TABLE
    TYPE:                     FREE ROLLER, CONVEYOR BELT
    SIZE:                     2100mm x 14,300mm
    ROLLER PITCH:             300mm
    ROLLER SIZE:              110mm x 800mm
    BELT PITCH:               1300mm
    BELT SIZE:                75mm x 10T

14. COOLING FAN
    QUANTITY:                 101 EA.

15. FACILITY INSTALLATION HISTORY
    Electrical and facility overhaul in 2008
    Back side table overhaul in 2014 
    Extrusion machine main pump overhaul in 2016

16. SPARE PART
    DUMMY:                    2 EA.
    STEM:                     1 EA.
    CONTAINER:                1 EA.
    BILLET INDUCTION COIL:    8" (203mm) x 3 EA.

 ** SPECIFICATIONS SUBJECT TO REVISIONS **

 ** SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER **

 ** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE **