22" (558mm) x 33" (838mm) 2-HI TEMPER PASS MILL (13353)
 
 
 MACHINE# 13353
 
 1. TECHNICAL SPECIFICATIONS:
 NEW PLC SYSTEM
 NEW THYRISTOR POWER CONTROL UNIT FOR PAY OFF REEL DC MOTOR
 NEW THYRISTOR POWER CONTROL UNIT FOR MILL DC MOTOR
 MATERIAL: MILD STEEL STRIP UP TO 1/4 HARD (ROCKWELL B69)
 FINISHING THICKNESS: 0.065" TO 0.010"
 COIL DIA: MAXIMUM 60", MINIMUM 32"
 COIL WIDTH: MAXIMUM 25", MINIMUM 16"
 COIL WEIGHT: 1500#
 MILL SPEED (22" DIA ROLL): 757/1,514 FPM (400 x 1/3.045 x 22/12=757)
 WORK ROLL: 22" DIA MAXIMUM 8'-6 7/8" OVERALL LENGTH
 
 2.PAY OFF REEL
 DC MOTOR: 100HP 350/1,200RPM 250VDC/300AMPS
 GEAR RATIO: 4.33/1
 DRUM: HYDRAULIC COLLAPSE 23" MAXIMUM DIA, 19" MINIMUM DIA
 COIL CHARGING CAR: HYDRAULIC LIFTER CYLINDER 7" BORE 15" STROKE 750# WORKING
 PRESSURE
 HYDRAULIC CARRIAGE CYLINDER 5" BORE 4'3" STROKE.
 STRIPPER: CYLINDER 3" BORE 26 1/2STROKE 750# WORKING PRESSURE
 
 3.MILL
 DC MOTOR: 300HP 400/800RPM 250VDC/970AMPS
 GEAR RATIO: 
 ROLL SCREW DOWN: HYDRAULIC CYLINDER 16" BORE 3 7/8" STROKE 6000PSI x 2 SET, 
 MOOG VALVE PID POSITION CONTROL, HYDRAULIC PUMP PF4015-1593 DYHEX/RIVRTT
 
 4.TENSION REEL
 DC MOTOR: 200HP 350/1200RPM 230VDC/710AMPS
 GEAR RATIO: 4.32/1
 COIL DISCHARGING CAR: LIFTER CYLINDER 7" BORE 19 3/4" STROKE 750# WORKING
 PRESSURE
 COIL CAR CARRIAGE CYLINDER: 5" BORE 6'STROKE 750# WORKING PRESSURE.
 COIL STRIPPER: 3" BORE 26 1/2" STROKE 750# WORKING PRESSURE
 
 5.ENTRY AND EXIT DEFLECTOR ROLL: 8" DIA 30" FACE
 
 6.ENTRY AND EXIT HYDRAULIC SYSTEM
 TANK CAPACITY: 500 GALLON
 VICKERS PUMP: MODEL V-144-10, 33.5G.P.M. @ 1000#/?"
 MOTOR: 25HP 1200RPM x 2 SET
 
 7.ROLL BALANCE HYDRAULIC SYSTEM
 TANK CAPACITY: 30 GALLON
 BALANCE CYLINDER: 2" DIA
 OPERATOR AT APPROX 1200PSI
 MOTOR: 5HP AC440V 1200RPM
 
 8.GEAR LUBRICATION SYSTEM
 TANK CAPACITY: 700 GALLON
 PUMP: 15G.P.M. @ 60 PSI x 2 SET
 MOTOR: 1 1/2HP AC440V 1200RPM x 2 SET
 
 9.MORG OIL LUBRICATION 
 TANK CAPACITY: 700 GALLON
 PUMP MOTOR: 1.5KW AC440V 1145RPM x 2 SET
 
 10.WORK ROLL POLISHING DEVICE
 
 11.MCC CONTROL PANEL
 
 12.PLC PANEL: MELSEC PLC (JAPAN)
 
 13.DC MOTOR THYRISTOR CONTROL PANEL
 PAY OFF REEL: EUROTHERM 590P/0380/500 x 1 SET
 MILL: EUROTHERM 590P/830/500 x 1 SET
 TENSION REEL: GENERAL ELECTRIC x 1 SET
 
 14.OPERATION CONTROL PANEL x 1 SET
 
 15.LAYOUT
 
 16.SPARE PARTS
 SCREW DOWN HYDRAULIC PUMP PF4015-1593 x 1 EA.
 GEAR PUMP 80BV x 1 EA.
 METAL BEARING DIA. 420 x L400 x 1 EA.
 WINDER DRIVE GEAR DIA. 900 x 8260B x 1 EA.
 WINDER PINION GEAR DIA. 300 x L1000 x 1 EA.
 
  ** SPECIFICATIONS SUBJECT TO REVISIONS **
 
  ** SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER **
 
  ** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE **