MACHINE #13637

SPECIFICATIONS

 -MANUFACTURER:              HENRICH

 -MODEL:                     M-85.11.A

 -TYPE:                      SE-13-01-SL ROD BREAKDOWN LINE

 -CAPACITY
  -MATERIAL:                 COPPER

  -ENTRY:                    8mm (5/16") DIAMETER

  -FINISH SIZE:              1.219mm (.048") TO 2.05mm (.080")

  -ENTRY:                    10.7mm (.420")

  -FINISH:                   1.372mm (.054") TO 2.05mm (.080")

 -SPEED:                     30 m/s (5910 FPM)

 -CAPSTAN SIZE:              457mm (18") DIAMETER
 -PULL-OUT CAPSTAN SIZE:     457mm (18") DIAMETER

 -DRIVE MOTORS:

  -CAPSTANS 1 THROUGH 3:     58kW (78 HP)
  -CAPSTANS 4 THROUGH 7:     52kW (70 HP)
  -CAPSTAN 8:                47kW (63 HP)
  -CAPSTANS 9 THROUGH 12:    30kW (40 HP)
  -PULL-OUT CAPSTAN:         47kW (63 HP)


LINE CONSISTS OF THE FOLLOWING:

 -(1) OVERHEAD WIRE PAYOFF

 -(1) HENRICH MODEL SE-13-01-SL ROD BEAKDOWN MACHINE

 -(1) HENRICH PULL-OUT CAPSTAN

 -(1) HENRICH MODEL ES-01-DR-501-4 CONTINUOUS RESISTANCE ANNEALER

  -DESIGN:                   4-CONTACT SHEAVE DESIGN

  -WIRE SIZE RANGE:          1.219mm (.048") - 2.588mm (.102")

  -CONTACT PULLEY DIA:       500mm (19.7")

  -ANNEALING SPEED:          MAXIMMUM 30 m/s
 
  -TRANFORMER SIZE:          360 kVA

  -ANNEALING VOLTAGE:        55 VOLT AC 3 PHASE

 -(1) DANCER/ACCUMULATOR

 -(1) BONGARD MODEL KW-800 STATIC (DEAD BLOCK TYPE) COILER

  -CAPACITY:                 1.20mm (.047") - 3.60mm (.141") DIAMETER

  -COILING SPEED:            0 - 32m/s 

  -COIL (BARREL) SIZE:       MAX HEIGHT...APPROX 2,000mm (78.7")
                             MIN HEIGHT......... 1,000mm (39.4")
                             OUTSIDE DIA..APPROX 1,100mm (43.3")
                             CORE DIA...........   590mm (23.2")

  *COILER IS EQUIPPED WITH   PNUEMATICALLY ACTUATED ACCUMULATION
                             MOTORIZED ROLL CONVEYOR
                             PNUEMATIC BARREL POSITIONING
                             LAYERING PENDULUM
                             SCISSOR TYPE LIFTING PLATFORM

 -FILTRATION SYSTEM:         FILTER TECH 200 GPM FILTRATION SYSTEM
                             -TWO COMPARTMENT RECEIVER TANK COMPLETE WITH

                              COVER, BAFFLES, TWO 7-1/2 HP CLEAN SUPPLY
                              PUMPS, ONE 7-1/2 HP FILTER FEED PUMP, ALL GAUGES

                              AND VALVES, CONTROL PANEL

                             -MODEL SCF4-800 VACUUM FILTER COMPLETE WITH 
                              5 HP VACUUM PRODUCER, 3/4 HP CONVEYOR DRIVE 
                              MECHANISM, AIR FLOW LEVEL CONTROL ASSY, CARRIER

                              BELT AND PIPING.

 -MOTOR DRIVES:              SIEMENS


**PRICE QUOTED IS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION AND SHOULD BE VERIFIED

BY PURCHASER**