Specifications:
With Payoff & Spooler

• Number of Blocks:  7
• Built in Elongation:  Yes                                           
• Angled Blocks:  Yes                           
• Diameter of Blocks:  18" (450mm)
• Soap Box:  One Each Stand W/Die Holder
• Dancer Arm:  One Each Stand
• Inlet Wire Diameter:  .120" (3.07mm)
• Finishing Wire Diameter:  .046" (1.18mm)
• Maximum Speed:   4100 FPM (1250mm)
• Cooling:   Internal Water Cooled Capstans and Dies
• Capstan Water Pressure:   40 L/MIN @Pressure of 100kPa
• Die Water Pressure:  15 L/MIN per Die @ A Pressure of 100 kPa
• Dust Extraction
• Directly behind the Drawing Dies:  1 X 37.5 Cubic Meters/H
• Entrance of Each Soap Box:  1 X 37.5 Cubic Meters/H
• Wire Straightener:   2 X 90 Cubic Meters/H
• Motors:  Ind. AC Motor W/Frequency Control on each Block
• Motor Power:  30 HP  (22kW)
• Power Supply:  415V/50Hz
• PLC:  Remote PLC
• Spooler
• Model:  OBX 
• Type:  Conical Reel WS2000
• Take-Up Speed:  1800M/Min
• Reel Dimension:  47" (1200mm) outside Dia x 31" (812mm) Core Diameter
• Take-up Pitch:  .47" (12mm)
• Drive Motor Reel:  64 HP (48.2 kW) DC 1648/2350 RPM
• Drive Motor Wire Guide: 1 HP (0.75 Kw) 2000 RPM Brake
• Compressed Air Connection: 6 Bar (85 PSI)
• Controls:  Touch Panel PLC

 **All specifications are subject to verification by purchaser**